Kenwood Blender BL450 series User Manual

BL450 series  
Head Office Address:  
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
Designed and engineered by Kenwood in the UK  
Made in China  
19144/3  
 
Important - UK only  
The wires in the cord are coloured  
as follows:  
Blue = Neutral  
Brown = Live.  
to use your blender  
1 Fit the sealing ring - ensuring the  
seal is fully located under the rim of  
the blade unit.  
Leaking will occur if the seal  
The appliance must be protected by  
a 3A approved (BS1362) fuse.  
is damaged or incorrectly  
fitted.  
2 Screw the blade unit onto the goblet  
. Refer to the graphics on the  
underside of the blade unit as  
follows:  
Note:  
For non-rewireable plugs the fuse  
cover MUST be refitted when  
replacing the fuse. If the fuse cover  
is lost then the plug must not be  
used until a replacement can be  
obtained. The correct fuse cover is  
identified by colour and a  
replacement may be obtained from  
your Kenwood Authorised Repairer  
(see Service).  
- unlocked position  
- locked position  
3 Put your ingredients into the goblet.  
4 Put the filler cap in the lid.  
5 Fit the lid to the goblet and turn  
clockwise to lock.  
6 Place the blender onto the power  
unit and turn clockwise to lock .  
If a non-rewireable plug is cut off it  
must be DESTROYED  
The appliance won’t work if  
IMMEDIATELY. An electric shock  
hazard may arise if an unwanted  
non-rewireable plug is inadvertently  
inserted into a 13A socket outlet.  
This appliance conforms to EC  
directive 2004/108/EC on  
Electromagnetic Compatibility and  
EC regulation no. 1935/2004 of  
27/10/2004 on materials intended  
for contact with food.  
the blender is incorrectly  
fitted.  
7 Select a speed (refer to the  
recommended speed chart).  
hints  
To blend dry ingredients - cut into  
pieces, remove the filler cap, then  
with the machine running, drop the  
pieces down one by one. Keep your  
hand over the opening. For best  
results empty regularly.  
key  
The processing of spices is not  
blender  
filler cap  
recommended as they may damage  
the plastic parts.  
locking lid  
goblet  
sealing ring  
blade unit  
speed + pulse control  
power unit  
cord storage  
mill (if supplied)  
mill jar  
When making mayonnaise, put all  
the ingredients, except the oil, into  
the blender. Remove the filler cap.  
Then, with the appliance running,  
add the oil slowly through the hole in  
the lid.  
Thick mixtures, e.g. pâtés and dips,  
may need scraping down. If the  
mixture is difficult to process, add  
more liquid.  
storage lid  
 
3
3 Turn the blade unit upside down.  
Lower it into the jar, blades down .  
Turn anti-clockwise to lock.  
4 Place the mill onto the power unit  
and turn clockwise to lock .  
5 Select a speed or use the pulse  
control.  
to use your mill  
1 Put your ingredients into the jar. Fill it  
no more than half full.  
2 Fit the sealing ring - ensuring the  
seal is fully located under the rim of  
the blade unit.  
Ensure that the seal is fitted  
6 After milling, you can replace the  
blade unit with the storage lid.  
correctly.  
recommended speed chart  
speed usage/food items  
max. quantity  
1
Frothing milk  
1 litre  
Light mixes e.g. batters, milkshakes,  
scrambled egg  
1 litre  
2
Soups & drinks  
Thicker mixes e.g. pâtés  
1.6 litres  
Mayonnaise  
3 eggs + 450ml  
oil  
Smoothie drinks  
Place the fresh fruit and liquid ingredients in  
first (includes yoghurt, milk and fruit juices)  
Then add ice or frozen ingredients (includes  
frozen fruit, ice or ice cream)  
800ml  
liquid  
Mill - use for dry ingredients only  
Herbs, nuts and coffee beans  
50g  
(P)  
Operates the motor in a start/stop action. The  
pulse pulse will operate for as long as it is held in  
position.  
Ice crushing - operate the pulse in short bursts  
until crushed to the desired consistency.  
6 cubes  
blade assembly  
1 Remove the blade unit from the  
goblet or mill by turning to the  
care and cleaning  
Always switch off, unplug and  
dismantle before cleaning.  
unlock position  
to release.  
Empty the goblet before unscrewing  
it from the blade unit.  
Don’t immerse the blade unit in  
water.  
Do not place any parts in the  
dishwasher.  
2 Remove and wash the sealing ring.  
3 Don’t touch the sharp blades –  
brush them clean using hot soapy  
water, then rinse thoroughly under  
the tap. Don’t immerse the  
blade unit in water.  
4 Leave to dry upside down.  
power unit  
Wipe with a damp cloth, then dry.  
other parts  
Don’t immerse the power unit in  
Wash by hand, then dry.  
water.  
Push excess cord inside the back of  
the power unit.  
 
4
service and customer  
care  
If the cord is damaged it must, for  
safety reasons, be replaced by  
KENWOOD or an authorised  
KENWOOD repairer.  
IMPORTANT INFORMATION FOR  
CORRECT DISPOSAL OF THE  
PRODUCT IN ACCORDANCE  
WITH EC DIRECTIVE  
UK  
If you need help with:  
using your appliance or  
servicing, spare parts or repairs (in or  
out of guarantee)  
call Kenwood customer care on 023  
9239 2333. Have your model  
number (ie BL450) and date  
code (4 digit code ie 6T41)  
ready. They are on the underside of  
the power unit.  
2002/96/EC.  
At the end of its working life, the product  
must not be disposed of as urban  
waste.  
It must be taken to a special local  
authority differentiated waste collection  
centre or to a dealer providing this  
service.  
Disposing of a household appliance  
separately avoids possible negative  
consequences for the environment and  
health deriving from inappropriate  
disposal and enables the constituent  
materials to be recovered to obtain  
significant savings in energy and  
resources. As a reminder of the need to  
dispose of household appliances  
separately, the product is marked with  
a crossed-out wheeled dustbin.  
spares and attachments  
call 0870 2413653.  
other countries  
Contact the shop where you bought  
your appliance.  
Designed and engineered by  
Kenwood in the UK.  
Made in China.  
guarantee (uk only)  
If your blender goes wrong within  
one year from the date you bought  
it, we will repair it (or replace it if  
necessary) free of charge provided:  
you have not misused, neglected or  
damaged it;  
it has not been modified (unless by  
Kenwood);  
it is not second-hand;  
it has not been used commercially;  
you have not fitted a plug incorrectly;  
and  
you supply your receipt to  
show when you bought it.  
This guarantee does not affect your  
statutory rights.  
 
5
carrot and coriander  
soup  
25g butter  
50g onion chopped  
1 clove garlic crushed  
1
640g carrot cut into 1 ⁄  
2
cm cubes  
cold chicken stock  
10-15ml (2-3tsp) ground coriander  
salt and pepper  
1 Melt the butter in a pan, add the  
onion and garlic and fry until soft.  
2 Place the carrot into the liquidiser,  
add the onion and garlic. Add  
sufficient stock to reach the 1.6 L  
level marked on the goblet. Fit the lid  
and filler cap.  
3 Blend on maximum speed for 5  
seconds for a coarse soup or longer  
for a finer result.  
4 Transfer the mixture to a saucepan,  
add the coriander and seasoning  
and simmer the soup for 30 to 35  
minutes or until cooked.  
5 Adjust the seasoning as necessary  
and add extra liquid if required.  
 
6

Indesit Clothes Dryer IS60VU User Manual
Infinity Speaker System 1001DVC User Manual
Ingersoll Rand Cordless Drill D040 User Manual
Insignia DVD Player NS 7PDVD User Manual
Intellinet Network Solutions Security Camera INT PSNC UM 1106 06 User Manual
Invacare Wheelchair E2621 User Manual
JVC Universal Remote RM RK50P User Manual
Kenmore Range 7909031 User Manual
Kenwood Car Video System KDC X493 User Manual
KitchenAid Coffeemaker KES2102 User Manual