Gas Dryer
PRODUCT MODEL NUMBERS
WGD8200Y, WGD8400Y,
WGD8600Y, WGD8800Y
Side view with open door dimensions:
Back view:
Bottom view:
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
Recommended Installation Spacing:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
■
■
■
■
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■
Companion appliance spacing should also be considered.
|
Whirlpool Ventilation Hood RH2624XJQ3 User Manual
Whirlpool Washer Dryer LA52OOXT User Manual
Whirlpool Washer WTW6400SW1 User Manual
Whynter Refrigerator wc 201td User Manual
Woodstock Paint Sprayer W1793 User Manual
Woodstock Planer W1829 User Manual
Xerox Copier MAX 200 User Manual
Yamaha Network Router CVP 505 User Manual
Yamaha Switch ACU16 C User Manual
Zanussi Refrigerator Z 52 6 W User Manual