Model D2056
Deluxe Tool Table
Instruction Sheet
The Model D2056 Shop Fox Deluxe Tool Table is designed to give you a solid, stable work surface. This
table has a 700 lb. capacity and yet it is light enough to be portable. The flared steel legs and cross
bracing top and bottom provide a solid foundation for the 13" x 23" x 1" butcher block style work surface.
Adjustable rubber feet assure a firm grip even when the floor surface may not be level. The table top is
301⁄2" high, providing a comfortable working height for a variety of benchtop machinery.
INVENTORY
PART #
DESCRIPTION
TABLE TOP
TABLE LEG
CORNER BRACKET
TOP BRACE W/ LOGO
SHORT BRACE
REF
1
4
4
2
2
2
4
20
32
32
32
XD2056001
XD2056002
XD2056003
XD2056004
XD2056005
XD2056006
XD2056007
XPHTEK37
XPTLW02M
XPN06M
LONG BRACE
ADJUSTABLE FEET
TAP SCREW #10 X 3⁄4"
EXT TOOTH WASHER 5MM
HEX NUT M5-.8
XPS08M
PHLP HD SCR M5-.8 x 12
Do not use the D2056 Shop Fox® Deluxe Tool Table until you have fully read and understood this
instruction sheet, and have completed the entire assembly procedure. Serious personal injury may
occur.
ASSEMBLY INSTRUCTIONS
Tools Required: Drill, 1⁄8'' drill bit, Phillips® screwdriver, 8mm or 5⁄16" open end wrench and a pencil.
1. Begin by loosely assembling the table legs and braces. On a table or the floor lay out two legs, the
longer lower brace, the upper brace (with Shop Fox® logo) and two corner brackets (refer to the
photo above for positioning). Using the shorter bolts (with nuts and star washers), attach the long
brace to the inside of the legs. Next attach the corner brackets to the outside edge of the legs.
Use the short bolts to attach one side of the bracket to the outer corner of the leg. Use the longer
bolts to attach the upper brace to the front edge of the corner bracket. Only hand tighten all the
bolts and nuts for now.
2. Now take these two leg assemblies and assemble the two short braces to the inside of each leg
using the pre-punched holes. Hand tighten these bolts only.
COPYRIGHT © SEPTEMBER, 1999 BY WOODSTOCK INTERNATIONAL, INC. REVISED APRIL, 2010 (TR)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#2121HV
Printed in China
|
Western Digital Computer Drive WD1001FALS User Manual
Western Telematic Network Card RMM 288 User Manual
Westinghouse Landscape Lighting 30904 User Manual
Whirlpool Clothes Dryer CSP2760TQ0 User Manual
Whirlpool Double Oven AKZM 656 User Manual
White Westinghouse Range ES200 300 User Manual
Woodstock Lathe M1015 User Manual
Wyse Technology Laptop 909522 41L User Manual
Xantech Universal Remote 172 94X User Manual
Xantech Universal Remote CC62 User Manual