Beko Blender BKK2152 User Manual

BKK 2152  
Blender  
User Manual  
 
CONTENT  
1 Safety Warnings  
2-3  
3
2 Technical Aspects Of Your Machine  
3 Using Your Machine  
4-5  
5
4 Maintenance and Cleaning  
1
 
1 Safety Warnings  
When using electrical appliances,  
in order to reduce the risk of fire,  
electric shock, and/or injury to  
persons, basic safety precautions  
should always be followed, includ-  
ing the following:  
The use of attachments or  
accessories not recommended  
or sold by this appliance manu-  
facturer  
may result in fire, electric shock or  
personal injury.  
Read all instructions carefully,  
even if you are familiar with the  
appliance.  
To protect against the risk of  
electric shock DO NOT IMMERSE  
the appliance, Cordset or Plug in  
water or other liquid.  
Do not overfull.  
Do not let cord hang over edge  
of a table, counter, or touch hot  
surface.  
Avoid touching hot surfaces, use  
handles and knobs.  
Do not operate or place any part  
of this appliance on or near any  
hot surface (such as a gas or elec-  
tric burner, or in a heated oven).  
Do not abuse the cord. Never  
carry the appliance by the cord or  
yank it to disconnect it from the  
outlet; instead, grasp the plug and  
pull to disconnect.  
When using the extension cord  
with your appliance make sure the  
extension cord is correctly wired  
and rated for its use.  
To clean, wipe exterior with a  
damp cloth.  
Close supervision is necessary  
when any appliance is used by or  
near children.Never leave an  
appliance unattended when in use.  
Switch off and remove the plug  
from the power outlet when not in  
use, before assembling or  
disassembling parts and before  
cleaning.To unplug, grasp plug  
and pull from power outlet. Never  
pull cord.  
Do not operate any appliance  
with a damaged cord or plug, or  
after the appliance malfunctions  
or is dropped or damaged in any  
manner.Return the complete appli-  
ance to your nearest  
authorised service facility for  
examination, electrical repair, me-  
chanical repair or adjustment.  
If operated on wood furniture,  
use a proctective pad to prevent  
damage to delicate finishes.  
This product is intended for  
household use only.  
Do not attempt to repair the  
appliance yourself; instead, take it  
your nearest Service Centre or Au-  
thorised Service Agent for repair.  
Handle carefully the sharp  
blades especially during removing  
and emptying the container and  
during cleaning.  
2
 
Attention  
Check whether the voltage indi-  
cated on the base of the product  
is the same as the voltage in your  
home.  
Before using your product, read  
carefully the following operating  
instructions.It is suggested that  
you keep these instructions in safe  
place.  
2 Technical Aspects Of Your Machine  
7
6
3
5
4
2
1
1- Cord Windins System  
2- Control Button (pulse-0-I-II)  
3- Motor Housing  
4- Washable Blade Assembly  
5- Plastic Container Jug Max. Capacity : 1500 ml.  
6- Lid  
7- Small Lid  
Voltage / Frequency : 220-240 V ~ 50/60 Hz  
Isolation Class  
Motor Isalation Class : B  
Power : 600 W max.  
:
Values stated on the markings of the product or in the printed documents accompanying he product  
are obtained in the laboratory on basis of the relevant standards. These values may change according  
to the usage and ambient conditions of the product. Power values are tested 240 V.  
3
 
3 Using Your Machine  
How to Use:  
Ensure the blender is switched  
OFF “O” and plug power cord into  
a power outlet.Turn blender switch  
to either setting for a few seconds.  
Switch OFF “O” and check the  
food. Blending is a fast process.  
Take care not to over blend.  
Use the PULSE setting for  
greater control in short blend-  
ing jobs.Switch must be held in  
PULSE position for blender to  
run. Blender will stop as soon as  
switch is released. Use the PULSE  
setting to prevent over blending  
of foods.  
If you wish to add ingredients  
whilst blending, liquids can be  
added through the hole in the  
lid insert, or the lid insert can be  
removed to allow dry foods to be  
added through the larger hole. DO  
NOT operate the blender without  
the lid and lid insert in place.  
Before first use, wash the Jar  
Assembly in warm sudsy water,  
rinse and dry well.Blending is  
a very fast process.The motor  
drives the cutter at high speed to  
ensure that through blending is  
achieved.Make sure that whenever  
you use blender it is standing on  
a flat, clean, dry surface.Before  
starting to blend check that the jar  
assembly is firmly in place on the  
motor base.  
Operation:  
With the motor unit resting on a  
flat dry surface and jar assembly  
firmly sitting in place, put the foods  
to be  
blended into the jar.  
Please note that the jar should be  
locked on to the main unit by hold-  
ing the washable blade assembly  
not the jar handle.  
Use the measuring scale on the  
jar as a guide and, to avoid having  
the food overflow, restrict the  
quantity  
to no more than 1500 ml. at any  
one time.Place lid and lid insert on  
jar assembly.  
Attention  
Do not operate the appliance con-  
tiniously more than 30 seconds.  
Do not operate the appliance  
when empty.  
Figure 1  
Figure 2  
4
 
Figure 3  
Figure 4  
Figure 5  
4 Maintenance and Cleaning  
Wash the blender jar and its  
associated parts in warm sudsy  
water after each use.Dry all parts  
throughly before storing.These  
parts are not dishwasher safe.  
Powdered cleaners and abrasive  
pads will damage the surface of  
the parts.Remove stubborn soil  
by soaking and wiping with soft  
cloths and mild liquid cleaners.  
NOTE: NEVER IMMERSE THE  
BASE ASSEMBLY IN ANY LIQUID.  
To clean the base, wipe clean with  
a damp cloth.Allow to dry thor-  
oughly before re-using or storing.  
To prolong the life of blender  
always:  
centimeter squares before adding  
into the jar.  
6-Remember that a blender can-  
not process raw meet.  
7-Ensure that the food being  
blended is not too thick or heavy  
for the motor to handle.If it seems  
to be having diffucultly, either  
add a little liquid through the lid  
or switch OFF “O”, remove the  
lid and scrape the mixture down  
towards the blade with a soft rub-  
ber spatula.  
8-Please DO NOT use the jar for  
storing foods or beverages.  
1-Use it on a flat dry surface.  
2-Have the lid in place when  
blending.  
3-Switch OFF “O” before you  
scrape food down the inside of the  
jar with a long handled spatula.  
4-Make sure there is something in  
the jar each time you switch “ON”.  
The cutter bearing may be dam-  
aged if run on “No-load”.  
5-Cut cooked meats into one  
5
 

Acer Server G300 Series User Manual
Acer Tablet B1 720 L864 User Manual
AEG Cooktop 730 E M User Manual
Aiphone Pet Fence SBX LSE User Manual
Athena Technologies Speaker System AS O6 User Manual
Avenview TV Converter Box DVI VIDEOWALL 4 User Manual
Axis Communications DVR 262+ User Manual
Axor Plumbing Product 42028820 User Manual
Barco Medical Alarms E 2620 User Manual
BK Stereo Receiver AVR101 Series User Manual