Beko CRT Television tr7854070200 User Manual

COLOUR TELEVISION  
Operating Instructions  
 
Television  
Thank you for buying this television which is designed to give you many years of  
satisfactory service.  
You may already be familiar with using a television but do please take time to read  
these instructions. They are designed to familiarise you with the units many new  
features and to ensure you get the very best out of your purchase.  
Special features  
• Automatic Programming  
• 100 Programme Memory  
• Available for Cable Channels (A decoder may be required)  
• Manual Fine Tuning  
• Skipping back to the last channel you have started to zapp via only one button  
(SWAP).  
• 16:9 picture format  
• Scart Socket: Video cassette recorder, satellite receiver, video disc player,DVD, TV  
games or a home computer can be connected to this AV socket with an appropriate  
connecting cable.  
• Normalization system to recall the setting in memory after the colour,contrast,  
brightness setting have been changed.  
• Automatic Volume Limiting.  
• Infrared Remote Control.  
Your TV will automatically switch off if it’s been programmed from 15 to 120 minutes.  
• Automatically switch to Stand by five minutes after a channel ceases to transmit.  
• Multi language menu system.  
• Naming the channels (Automatic with ATS).  
• NTSC playback.  
• S-VHS via Scart.  
• ATS: Automatic Tuning System with country selection (*).  
• Audio/Video RCA sockets (*).  
• Headphone socket (*).  
Teletext reception (*).  
• Zapping (*).  
• On Timer (*).  
• I.P.S.: Intelligent Programme Switch: You can set your TV to skip to a specific  
channel at a specific time. It works also as an alarm function (*).  
• Childlock (*).  
Please Note: Zapping, I.P.S., Childlock are optional if ATS exists.  
(*) : These features are not available in all models.  
2
 
Safety is Important  
Your safety and the safety of others is important. Please, therefore, ensure you read  
the Safety instructions before you operate this television.  
Safety instructions  
Read all the safety instructions before first use of your TV.  
• Position the television so that direct light does not fall on the screen.  
Excessive light will cause a washed out effect.  
• Position the power supply lead and other leads so that they are not likely  
to be walked on or pinched by things placed on or against them.  
• Do not use the appliance in humid or damp conditions.  
Do not allow the appliance to get wet, i.e. dripping or splashing, as this  
may be dangerous. Do not place water filled objects, such as vases and  
flower top on top of the appliance.  
• Make sure that no naked flame sources, such as lighted candles, are  
placed on top of the appliance.  
• Do not place the television near heat sources such as radiators, ovens,  
stoves, etc.  
• Do not use the television near any apparatus that produces a magnetic  
field such as HI-FI speakers or electric motors otherwise colour purity may  
be affected.  
• The heat built up in the set escapes through ventilation holes, so do not  
cover the set by drapes, clothes etc. that may block air circulation. Do not  
place the television on carpet or soft furnishings.  
• NEVER let children push anything into the holes or slots on the case.  
• Clean the TV Screen using a slightly damp cloth or chamois leather. Never  
use abrasive cleaning agents like liquid or aerosol cleaners.  
• Remove the mains plug from the socket outlet while cleaning.  
• If you wish to place the television on a shelf or in a wall unit always ensure  
there is a minimum air gap of 8 cm around the top, sides and rear of the  
television, to assist ventilation.  
Your TV set is designed to operate with mains voltages 230V AC; 50Hz.  
Do not connect your TV set to power sources other than the mains supply.  
3
 
Getting started  
Remove your Television carefully from the  
box. You may wish to store the packaging  
for future use.  
Press the Power button on the  
front of the TV. The standby  
indicator will illuminate.  
Press the Program up, Program  
down button or Numeric Buttons  
on the remote handset to switch  
the TV on.  
In the box  
Inside your this package you should have:  
Television  
• Remote control  
• User guide  
• AAA batteries x 2  
The standby indicator remains on.  
The picture will appear after a few  
seconds.  
Read these instructions before use.  
Switch off  
Aerial connection  
Press the Standby button to switch  
the TV to standby. The standby  
indicator will brighten.  
To connect an aerial, plug the aerial lead  
into the aerial socket on the rear of the  
TV.  
Please Note  
Do not leave the television on standby  
unattended or overnight.  
Switching the TV on for the first time  
To install your TV, please read the sections  
“Tuning the television”.  
Battery fitting  
Insert the 2 AAA Batteries supplied into  
the compartment on the rear of the remote  
control, ensure you follow the polarity  
diagram inside the compartment.  
You can use an outdoor or indoor aerial.  
However, if you use an indoor aerial the  
quality of the reception may be reduced  
and adjustment of the aerial may be  
required when changing programs.  
Please note  
If you live in a poor reception area or use  
an indoor aerial you may experience loss  
or corruption of teletext transmissions.  
Switching on  
Mains power  
Connect the mains plug into the mains  
socket and switch on.  
Connect the TV mains plug into your  
domestic mains socket outlet (230 V 50  
Hz AC).  
Please Note  
When your TV is not in use disconnect  
the plug from the mains power supply.  
4
 
Control Unit  
Front and rear panel  
14” (37 cm), 15” (38 cm) 20” (51 cm) and 21” (55 cm) TV sets:  
External Connections: (Front or side)  
Front  
Program/Volume increase button  
Program/Volume selection button:  
This button allows you to select  
program or volume mode on the  
front panel.  
Side  
V
A
Headphone socket  
Left audio RCA/  
Mono RCA (White)  
Program/Volume decrease button  
A
V
20” (51 cm), 21” PF (55 cm) TV sets:  
Video RCA (Yellow)  
Volume decrease button  
External connections: (Rear)  
AV1 scart  
Volume increase button  
Program decrease button  
Aerial socket  
Power cable  
Program increase button  
Please note:  
General  
The Audio/Video RCA and Headphone socket can  
be placed on the front panel or on the right-hand  
side of the cabinet depanding to the model of your  
TV.  
Power ON/OFF switch  
Stand by indicator  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
MUTE button  
Remote control  
Ten key program button  
Two digit program button (-/--)  
MENU button  
Program up button  
Volume decrease button  
Return to selected programme button (SWAP)  
Information button (i)  
STAND-BY button  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
AV-TV selection button  
OK button  
Volume increase button  
Program down button  
16:9 picture format button  
Sleep timer button  
Normalization button  
For Teletext Function (Opt.)  
15. Yellow fastext button  
16. Blue fastext button  
17. Teletext/TV select button  
18. Enlarge button  
19. UPDATE button  
20. MIX button  
21. Green fastext button  
22. Red fastext button  
23. STOP button  
24. SUB-PAGE button  
25. REVEAL button  
5
 
Using the TV  
Press the Mute button again to  
restore the sound. The symbol  
will disappear.  
TV controls  
Program selection  
Pressing Volume down buttons  
will decrease the volume without  
restoring .  
But pressing the Volume up  
button will increase the volume  
with restoring.  
Press the Program up or  
Program down buttons on the  
TV or remote control or press a  
Numeric button to select a  
programme.  
To select a programme whose  
number is greater than 9 using  
the numeric buttons, press the  
-/-- button first and then press the  
two Numeric buttons. For  
example, to select programme 12,  
press the -/-- button followed by  
1 and then 2.  
ZAPP Function (Optional)  
Select the programme you would  
like to recall by pressing SWAP  
button. Selected programme  
number will appear on the upper  
left side of the screen. Watching  
any programme, you can recall  
the selected one by pressing  
SWAP button again. If you press  
SWAP button again, you can  
recall the last programme you  
watched. You can cancel ZAPP  
function by pressing INFO button.  
Optionally you can also select a  
program by pressing in the OK  
button (by ATS included models  
only).  
Press the OK button and program  
list will appear on the screen with  
programme numbers on it.  
SWAP  
SWAP  
ZAPP: PR01  
PR11 PR12  
PR13  
SORTING  
P 00  
P 01  
P 02  
P 03  
P 04  
P 05  
P 06  
P 07  
P 08  
P 09  
TRT1  
ATV  
SWAP  
Allows you to swap between the  
program you are watching and the  
last selected program. i.e. If you  
were watching Program 1 and  
change to Program 11, press the  
SWAP button to go back to  
Program 1. Press it again to return  
to Program 11.  
SKIP  
MOVE  
DELETE  
NAME  
Use the Program up and  
Program down buttons to scroll  
through the program list.  
Press the MENU, TXT, 16:9 or i  
button to close the program list.  
SWAP  
SWAP  
PR01  
PR11  
PR01  
Note: If Zapping function is available  
SWAP function will not work.  
Info  
By pressing the “WHITE (i)” button  
the programme number and  
programme name (if it is exist) will  
appear on the screen. This will  
disappear automatically after a few  
seconds.  
Volume  
Press the Volume up  
or  
Volume down button on the front  
panel of the TV or press the “ Vol“  
or “Vol “ button on the remote  
control. A sound level bar will  
appear on the screen.  
AV  
Mute  
For use when you are connecting an  
external source to your TV (Video  
recorder, DVD player etc.) via the SCART  
sockets or RCA sockets.  
To mute the sound press the Mute  
button on the remote control.  
A loudspeaker symbol will appear  
onthe screen.  
See ‘Connecting external equipment’.  
6
 
Press the AV/TV button to select  
your input as follows:  
Starting with Program P1, tune in  
the first channel as follows:  
Use the Program up button to  
select SEARCH.  
1 AV1 when using SCART socket 1.  
2 AV1 S-VHS for S-Video equipment to  
scart 1 (S-VHS / Scart adapter is needed).  
3 AV2 when using the RCA sockets of  
the TV. (Optional)  
Press the Volume up or Volume  
down button to start the tuning  
search.  
Press the AV/TV button again to  
return to TV.  
The search arrow will appear.  
When the search finds a strong searching.  
The picture will appear, channel signal it  
will stop.  
Tuning the television  
There are two ways of tuning your  
television:  
• Manual, where you control the tuning  
process or Autoprogram where the  
television does it all automatically.  
• The TV sets equipped with ATS  
(Automatic Tuning System) sorts the  
channels regarding the broadcasting  
system of your country (optionally).  
Identify which channel you are watching  
(BBC 1, ITV 1 etc.) and decide which  
program number you want it to be.  
Use the Program down button  
to select PROGRAM NO.  
Use the Volume up/down  
buttons to select the program  
number.  
Please Note  
If the TV is set to a channel with no signal  
the TV will return to standby after 5  
minutes. The time remaining is displayed  
on the screen.  
Use the Program down button to  
select STORE. Press the OK  
button and STORED will appear  
on the STORE line.  
Manual Tuning  
Tuning the TV is accessed through the  
SETUP menu.  
You have now stored the first  
channel.  
Use the Program up button to  
select again SEARCH and  
continue the tuning procedure  
until you have tuned in all the  
programmes you want or the  
television can receive.  
To access the SETUP menu:  
Press the MENU button twice. SETUP  
Menu will appear.  
SETUP  
CHANNEL  
SYSTEM  
C 26  
BG  
0
FINE TUNE  
SEARCH  
b) If you know the channel number.  
(Tuning with channel numbers)  
Enter the SETUP menu by pressing MENU  
button twice.  
AUTOPROGRAM  
CHILD LOCK  
PROGRAM NO  
STORE  
OFF  
P6  
0
9
C/S  
NEXT MENU  
Press the OK button to select “S”  
for cable channels and “C” for  
terrestrial broadcast.  
a) If you don’t know the channel  
number (Tuning with SEARCH  
function).  
Use Volume up/down button to  
select the channel number or enter  
the channel number using the  
Numeric buttons.  
Enter the SETUP Menu by pressing the  
MENU button twice.  
In the SETUP Menu select  
PROGRAM NO and change to P1  
using the Program down button to  
select it and the Volume up or  
Volume down button to change it.  
Use the Program down button  
to select PROGRAM NO.  
7
 
Enter the desired program number  
by using the Ten key program  
buttons  
Please Note:  
a) On the TV sets equipped with ATS a  
COUNTRY SELECTION menu will  
appear.  
Use the Volume up/down buttons  
to select the program number.  
Select the desired country using Program  
and Volume buttons.  
Use the Program down button  
to select STORE. Press the OK  
button and STORED will appear  
on the STORE line. The channel  
will be stored with the program  
number you desired.  
Press the OK button to select the country  
and press the OK button again the  
Automatic Tuning System regarding  
the broadcasting system in the desired  
country.  
b) On the TV sets without ATS pressing  
the OK button starts AUTOPROGRAM.  
You have now stored the first  
channel.  
When you are sure the aerial is  
connected properly press the OK  
button and to confirm it press  
OK button again.  
Use the Program up button to  
select again CHANNEL and  
continue the tuning procedure until  
you have tuned in all the  
programmes you want or the  
television can receive.  
To cancel Autoprogram whilst it is  
working press the Menu button.  
As Autoprogram stores a channel  
it will appear briefly on the screen.  
To exit the SETUP menu press  
the TXT button.  
Your TV is now tuned and ready to use.  
Please note  
Please note:  
The system will displayed automatically  
on SYSTEM row i.e.BG, L, I, DK  
depending the receiving broadcasting  
system of the country. In some countries  
the broadcasting system can be both in  
BG/DK or BG/LL´.Only the TV sets  
produced with Pal Secam BG/DK or Pal  
Secam BG/LL´ systems can receive both  
BG/DK or BG/LL´ broadcasts.  
If auto sort fails to arrange the programmes  
in the required sequence please refer to  
programme organising. See the Program  
Organising.  
Fine Tuning  
Although the search and Autoprogram  
will automatically try and tune to the  
best reception, in areas of poor reception  
a bit of fine tuning may be required.  
Please note  
If you do not press any buttons for 15  
seconds the TV will exit the menu system.  
In the SETUP menu use the  
Program down button to select  
FINE TUNING. Use the Volume  
up and Volume down buttons to  
fine tune.  
Automatic Tuning (Autoprogram)  
Enter the SETUP menu as before.  
SETUP  
CHANNEL  
SYSTEM  
C 26  
BG  
0
When you have finished use the  
Program down button to select  
STORE and press the OK button.  
FINE TUNE  
SEARCH  
AUTOPROGRAM  
CHILD LOCK  
PROGRAM NO  
STORE  
OFF  
P6  
0
9
C/S  
NEXT MENU  
Use the Program down button to  
select AUTOPROGRAM and  
press the OK button.  
8
 
Child lock  
Press the Blue button again to  
store the name.  
Childlock switches off the programme you  
are watching when you select it. All other  
programmes are unaffected. If you go  
back to the programme with childlock on  
you will see a black screen with the OSD  
Repeat this process to name all  
the programmes.  
Please Note  
showing (  
programs as you want.  
) . You can lock as many  
Some TV channels may send their  
names with teletext transmission. In this  
case their names will be automatically  
shown on the name line.  
Press the Volume up button to  
switch the Child lock on or off.  
To move the programmes  
You can move the programmes around  
the programme list to the order you want  
Program organising  
Once you have tuned in all the channels  
you want, you can change their  
programme number, if required, and name  
them.  
Select the programme you want  
to move and press the Green  
button. The programme will turn  
to green.  
To enter the SORTING menu  
press the OK button.  
Select the number you want to move the  
programme to and press the Green button  
again and the programme will be moved  
to that number.  
SORTING  
P 00  
P 01  
P 02  
P 03  
P 04  
P 05  
P 06  
P 07  
P 08  
P 09  
TRT1  
ATV  
All the following programmes are shifted  
down by one place.  
SKIP  
To delete a programme  
MOVE  
DELETE  
NAME  
To delete a programme, select it  
and press the Yellow button,  
the programme will be deleted.  
All the following programmes are  
shifted up by one position.  
PROGRAM 01 will be selected and the  
channel stored under PROGRAM 01 will  
be showing on the screen.  
The details of the program will be shown  
across the top of the screen i.e. P1  
CH31.  
To skip the programme  
Press the Red button, the selected line will  
turn red. Skipped programmes will not  
appear when you move through the  
program list using the Program up or  
Program down buttons.  
The buttons used to edit the programs  
are shown at the bottom of the display:  
-
-
-
Red button Skip  
Green button Move  
They can still be selected using the numeric  
buttons or OK of button.  
Yellow button Delete  
Blue button  
-
Name  
Press the Red button again to unskip the  
programme.  
To name the programmes  
Press the Blue button, the  
selected line will turn blue and  
the CH will be highlighted.  
Use the Program up and  
Program down buttons to select  
the letters and numbers and the  
Volume up and Volume down  
buttons to move through the  
name.  
9
 
• Features Menu  
To reach the feature menu press three  
times to MENU button.  
TV set up  
TheTV set up is accessed through a menu  
system.  
FEATURES  
SLEEP TIMER  
ON TIMER  
AVL  
OFF  
OFF  
ON  
Once you have stored your set up, this  
is the set up the TV will default to when  
you switch it on.  
LANGUAGE  
EXIT  
Please note  
If you do not press any buttons for 18-19  
seconds the TV will exit the menu system.  
a) Sleep Timer  
The sleep timer automatically switches  
the set to stand-by after the preset time  
has elapsed.  
There are three menus;  
• Picture Menu  
• Setup Menu  
You can select the time from 15 to 120  
minutes with 15 minutes steps.  
• Features Menu  
• Picture Menu  
To reach the picture menu press one time  
to MENU button.  
There are two ways to set the sleep timer;  
1- Select the SLEEP TIMER in the  
FEATURES menu. Select the desired time  
by using Volume down or Volume up  
buttons.  
PICTURE  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
STORE  
2- You can also use the YELLOW (  
)
button on your remote control to select  
this function. You can increase the switch  
off time interval by pressing this button  
repeatedly.  
NEXT MENU  
The picture menu allows you to set up  
the following:  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
Notes:  
The last 60 seconds of the desired switch  
off time by counting from  
59 down.  
When this time interval has elapsed the  
set will switch to STAND-BY.  
To change, for example, the  
colour, select it using Program  
down buttons.  
To view the remaining sleep time, press  
YELLOW ( ) button. To cancel the sleep  
time select OFF in SLEEP TIMER.  
Use the Volume up and Volume  
down buttons to change the  
setting.  
b) On Timer  
To save your settings, select  
STORE and press the OK button.  
STORED will be displayed.  
You can select the on time between 30  
minutes to 12 hours by pressing numeric  
buttons or AV button.  
Note:  
If you play NTSC formatted tape from  
the scart, the TINT menu will appear to  
adjust the TINT level.  
If TV is at Stand-by position, you can  
switch it on at desired time and programme  
by activating the ON TIMER feature.  
To cancel the on time select off in ON  
TIMER.  
• Setup Menu  
Setup Menu is explained on the page 8  
10  
 
c) AVL:  
Picture format  
TV transmitters have different sound levels.  
AVL (automatic volume limiting) maintains  
the same sound level as you switch from  
program to program.  
This allows you to select the picture of  
your TV.  
Avaible formats of TV sets are 4:3 and  
16:9.  
From the features menu you can select  
AVL button by pressing Program down  
button.  
To supply this press Volume up or down  
button and select ON for AVL.  
You can change the picture format to  
16:9 to able to watch the inputs in 16:9  
format, i.e. some broadcasts and DVD’s  
by pressing 16:9 button.  
FEATURES  
SLEEP TIMER  
ON TIMER  
AVL  
OFF  
OFF  
ON  
LANGUAGE  
EXIT  
Press the 16:9 button to see the  
chosen format on the lower center  
right side of the screen and press  
the 16:9 button again to change  
the picture format.  
d) Language  
There are many languages available for the  
On Screen Displays (OSD).  
Normalization  
• Whilst watching TV you may change the  
In the features menu select  
Language by program down  
button.  
picture While restore the original picture  
setting press the BLUE  
the remote control.  
button on  
Press the OK button to select  
the language list.  
Press the Program up/down  
or Volume up/down buttons to  
page through all the languages  
and OK to select.  
11  
 
Using Teletext  
Teletext is an information system that  
displays text on your TV screen. Using  
the teletext control buttons you can view  
pages of information that are listed in the  
teletext index (Teletext reception is  
optional).  
Page search whilst watching TV  
In Text mode press the Update  
button. The TV will return to TV  
mode with the text page number  
in the top left hand corner of the  
screen.  
Please Note  
Enter the page number you want  
using the Numeric buttons.  
The top line of the text page will  
appear whilst the text searches for  
your page. When the page is found  
the number will remain in the top  
left hand corner of the screen.  
No on screen display is available in text  
mode. The contrast, brightness and colour  
cannot be changed but the volume control  
is still available.  
To enter Text mode  
Please Note  
Make sure the TV channel you are  
watching transmits teletext.  
Press the Update button to view  
your selected page of text.  
Press the TXT button. The text  
page will appear, normally the  
index page.  
Double height text  
If you have difficulty reading the  
text on the TV you can double the  
height of the text.  
To exit Text mode  
Press the TXT button. The TV  
will return to the channel you were  
watching.  
Press the Double button. The top  
half of the page will be displayed  
in double height text.  
To select a page of text  
Find the number of the page in  
the index and enter it using the  
Numeric buttons. The number of  
the page will appear in the top  
left hand corner of the screen.  
Press the Double button again.  
The bottom half of the page will  
be displayed in double height text.  
Press the Double button again to  
return to the full page.  
The page counter will search for  
your page. When it finds it, the  
page will be displayed.  
Page hold  
To move to the next page of text  
press the Program up button.  
If the page of text you have  
selected contains sub pages,  
these sub pages will automatically  
be displayed in order with a delay  
to allow you to read the page.  
To move to the previous page  
press the Program down button.  
To stop the move to the next sub  
page press the Stop button.  
STOP will appear in the top left  
hand corner.  
TV/text mix  
To view a page of text whilst  
watching a TV programme press  
the Mix button. The text will be  
superimposed over the TV  
programme.  
To continue moving through the  
sub pages press the Stop button  
again.  
Press the Mix button again to  
return to the text page.  
12  
 
To select a sub page  
If the page of text you are viewing  
Connecting  
contains sub pages, the number  
of the sub page you are on and  
the total number of sub pages is  
displayed on the right of the screen  
i.e. 1/7.  
external equipment  
You can connect a wide range of audio  
and video equipment to your TV.  
To select a sub page press the  
Sub button. The number in the  
top left hand corner will be  
replaced by S followed by 4  
asterisks.  
Headphones  
The headphones must have an impedance  
of between 8 and 32 ohms and have a  
3.5 mm stereo jack plug.  
Plug the headphone jack into the  
headphone socket of the TV.  
Enter the number of the sub page,  
using the Numeric buttons in the  
format S0001 for sub page 1.  
Connecting Video Recorder,  
DVD Player, Decoder.  
Via SCART  
The teletext will search for the  
sub page. This may take some  
time. To return to the TV whilst  
the teletext is searching press the  
Update button.  
Make sure the TV and video recorder are  
both switched off.  
Plug one end of the SCART lead (not  
supplied) into the back of the video  
recorder and the other end into the SCART  
socket on the back of the TV.  
When the page number is found  
it will appear in the top left hand  
corner of the screen.  
Switch on the video recorder and the TV.  
Press the AV/TV button on the  
remote control to select AV1.  
Press the Update button again to  
view the text page.  
Please note:  
You can connect a RGB external  
equipment  
via Scart 1. It is necessary to use full  
Scart cable for this purpose.  
To reveal information  
Press the Reveal button to reveal  
concealed information (quiz  
answers etc.).  
Select the video outputs of external device  
by using its menu to RGB if it’s available.  
Press the Reveal button again  
to conceal the information again.  
You can also play NTSC formatted tape  
from scart (Optional).  
Clock  
Press the Sub button, whilst  
watching aTV program , to display  
the time.  
S-Video Player  
If you have an S-Video player you can  
connect it to SCART socket 1via an adaptor  
from scart to S-Video/RCA audio (not  
supplied).  
Fastext  
Press the AV/TV button two times  
to select AV1 S-VHS.  
At the bottom of the teletext screen is a row  
of subject headings in red, green yellow and  
blue.  
The remote control has a row of coloured  
buttons corresponding to the row of  
coloured subjects on the screen.  
Pressing one of the coloured buttons will  
take you directly to the page corresponding  
to the subject heading.  
Via RCA lead  
Make sure the TV and video recorder are  
both switched off.  
Plug one end of the RCA lead into the video  
and audio out sockets on the back of the  
video recorder and plug the other end into  
the video and audio in sockets of the TV.  
13  
 
Via aerial socket (Only for Video Recorder)  
Make sure the TV and video recorder are both switched off.  
Unplug the aerial lead form the TV and plug it into the aerial socket on the video  
recorder (if fitted).  
Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug  
the other end into the aerial socket of the TV.  
Switch on the video recorder and the TV.  
If your video recorder has a test signal, switch it on. (Refer to the video recorder user  
guide).  
See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test  
signal. Select a programme number 0 or between 55 and 99.  
Audio In  
AUDIO  
Video In  
VIDEO  
21 pin SCART  
connector  
to 21 pin SCART  
input on TV  
VIDEO RECORDER  
or  
DVD PLAYER or DECODER  
Connecting TV with camcorder  
AV1  
Connecting TV games and computer  
AV1  
AUDIO  
Audio In  
AUDIO  
Audio In  
Video In  
Video In  
VIDEO  
VIDEO  
Camcorder  
Connecting TV with video and satellite/digital receiver  
14  
 
Help and service  
tips  
No sound  
The TV does not work  
• Is the sound muted? Press the Mute  
button.  
Make sure it is plugged into the mains  
supply and switched on.  
Is the volume turned down?  
Are there headphones connected?  
Poor picture  
• Is the aerial plugged in?  
Sound coming from only one speaker  
• Is the balance set to one side? See  
the sound menu.  
If you are using a set top aerial is it  
properly aligned for the best signal.  
• Make sure the aerial is not to close to  
neon lights, loudspeakers etc.  
• If you have external speakers, has one  
of  
them become disconnected.  
Try changing the direction of the outdoor  
aerial. High buildings and mountains  
can cause ghost pictures or double  
images.  
No response to the remote control  
Try changing the batteries.  
Is there an obstruction between the  
• The picture quality may be reduced by  
connecting two external sources at once.  
Disconnect one of the sources.  
• Adjust the fine tuning.  
remote control and the sensor on the TV.  
If nothing works  
If you have tried the above solutions and  
none seem to work, try switching the unit  
off and on again.  
No picture  
Is the aerial plugged in properly?  
Is the aerial lead damaged?  
If this does not work contact your supplier  
or TV repair technician. Never attempt  
to repair a defective TV yourself.  
• Are all the plugs in the aerial lead fitted  
correctly?  
• Have you pressed the correct buttons  
on the remote control?  
15  
 
Technical specifications table  
Picture tube  
size/type  
14”  
4:3  
15”  
PF  
20”  
4:3  
21”  
4:3  
21”  
PF  
Screen size  
37 cm  
34 cm  
2 W  
38 cm  
36 cm  
2,5 W  
45 W  
4 W  
51 cm  
48 cm  
2,5 W  
45 W  
4 W  
55 cm  
51 cm  
2,5 W  
45 W  
4 W  
55 cm  
51 cm  
2,5 W  
45 W  
4 W  
Visible  
screen size  
Sound Output  
(%10 THD)  
Power  
consumption  
30 W  
4 W  
Stand by  
Power  
consumption  
General technical specifications  
Power Supply  
AC:.............................................................230-240V 50Hz  
Number of preset programmes...............100  
RF Aerial input..........................................75 ohm (unbalanced)  
Speaker empedance.................................8 ohm  
Audio output ............................................Mono  
Batteries....................................................2xAAA  
Receiving channels..................................VHF (Band I Channels 2-4)  
....................................................................VHF (Band III Channels 5-12)  
....................................................................UHF (Channels 21-69)  
....................................................................Cable TV (S1-S20/S21-S41)  
Receiving broadcast system....................  
PAL BG  
PAL SECAM BG  
PAL SECAM BG DK/DK'  
PAL SECAM BG LL’  
PAL I  
Please note:  
Your TV set is produced to receive only “one “ of this colour and sound system  
options which is based one your countries norms and can not be changed by user  
except BG/DK and BG/LL´ if both systems are avaible to receive (BG or DK and BG  
or LL´). Please refer to “Tuning the TV”.  
16  
 

2Wirer HDCR 1230G User Manual
3Com Modem 10241644 00 User Manual
Acer Personal Computer M3900 User Manual
Advanced Wireless Solutions Automobile Parts EMO 500 User Manual
AEG Washer 86850 User Manual
Aiwa Cassette Player VX S205U User Manual
Alphasonik Car Amplifier PM12005E User Manual
Amana Clothes Dryer ND 68 User Manual
American Standard Plumbing Product 206490X User Manual
Ativa Paper Shredder DSD160D User Manual