Beko Clothes Dryer DC 7100 User Manual

Condenser  
Time Dryer  
DC 7110  
 
TABLE OF CONTENTS  
Programme selection and consumption  
table..................................................15  
Auxiliary function................................16  
Warning indicators.............................16  
Time delay.........................................16  
Starting the programme.....................16  
Progress of programme.....................16  
Changing the programme after it has  
started...............................................16  
Child-proof lock.................................16  
Finishing by canceling the programme16  
End of programme ............................17  
1 Your Dryer  
Overview .............................................4  
Technical Specifications.......................5  
4
2 Important safety information6  
General safety .....................................6  
Intended use .......................................7  
Childrens safety ..................................7  
3 Installation  
Appropriate installation location ...........8  
Removing the transportation safety  
8
assembly.............................................8  
Under counter installation ....................8  
Mounting over a washing machine.......8  
Connection to water drain; ..................8  
Adjusting the feet.................................9  
First use ..............................................9  
Disposing of packaging material ..........9  
Transportation of the machine .............9  
Disposing of the old machine...............9  
7 Maintenance and cleaning 18  
Filter Cartridge / Door Inner Surface...18  
Sensor ..............................................18  
Water tank;........................................18  
For the condenser ............................19  
8 Suggested solutions for  
problems  
20  
21  
9 Guarantee  
4 Electrical Connection  
10  
What is covered?...............................21  
What is not covered?.........................21  
Important notes.................................21  
Attention!...........................................10  
Electrical requirements.......................10  
Fitting a different plug .......................10  
Washer/dryer combination.................10  
10 Service  
22  
5 Initial preparations for drying11  
Things to be done for energy saving:.11  
Laundry suitable for drying in the  
machine ............................................11  
Laundry unsuitable for drying in the  
machine ............................................11  
Preparing laundry for drying...............12  
Correct load capacity ........................12  
6 Selecting a Programme and  
OperatingYour Machine  
13  
Control panel.....................................13  
Preparing the machine.......................14  
Programme selection.........................14  
 
3 EN  
1 Your Dryer  
Overview  
7
1
6
5
2
4
3
1- Control panel  
5- Rating plate  
6- Fluff filter  
2- Kick plate opening tab  
7- Power cord  
3-Adjustable feet  
4-Kick plate  
 
4 EN  
Technical Specification  
EN  
2
Height (adjustable)  
84.6 cm  
59.5 cm  
53 cm  
7 kg  
Width  
Depth  
Capacity (max.)  
Weight (net)  
35 kg  
Voltage  
Check the rating label  
Rated power input  
Model code  
Rating label is located behind the loading door.  
Specifications of this appliance may change without notice to improve the quality of the product.  
Figures in this manual are schematic and may not match your product exactly.  
Values stated on the machine labels or in the documentation accompanying it are obtained  
in laboratory in accordance with the relevant standards. Depending on operational and  
environmental conditions of the appliance, values may vary.  
 
5 EN  
2 Important safety information  
This section includes safety information that will  
help protection from risks of personal injuries  
or materialistic damages. Failure to follow  
these instructions shall cause any warranty and  
reliability commitment to become void.  
or explosive materials as well as the items  
that are contaminated or spotted with such  
materials should not be dried in the product  
since they emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
• Do not dry unwashed items in the dryer.  
• Items soiled with cooking oils, acetone,  
alcohol, fuel oil, kerosene, stain remover,  
turpentine, paraffin and paraffin removers  
must be washed in hot water with plenty of  
detergent before being dried in the dryer.  
• Garments or pillows bolstered with rubber  
foam (latex foam), shower bonnets, water  
resistant textiles, materials with rubber  
reinforcement and rubber foam pads should  
not be dried in the dryer.  
General safety  
• Never place the machine on a carpet-covered  
floor, otherwise, lack of airflow beneath  
the machine may cause electrical parts to  
overheat. This will cause problems with your  
machine.  
• If the power cable or mains plug is damaged,  
you must call Authorised Service Agent for  
repair.  
• The product should not be plugged in during  
installation, maintenance and repair works.  
Such works should always be made by the  
technical service. Manufacturer shall not  
be held responsible for damages arising  
from processes carried out by unauthorised  
persons.  
• Connect the product to a grounded outlet  
protected by a fuse of suitable capacity as  
stated in the technical specifications table.  
• Operate your product at temperatures  
between +5°C and +35°C.  
• Do not use electrical devices in the product.  
• Do not connect the air exit of the product  
to the chimney holes which are used for the  
exhaust fumes of the devices operating with  
gas or other types of fuel.  
• Do not use fabric softeners and anti-static  
products unless they are recommended by  
the manufacturers of the fabric softener or  
the product.  
• This product must be grounded. Grounding  
installation decreases the risk of electric  
shock by opening a path with low resistance  
for the electricity flow in case of a malfunction  
or failure. Power cable of this product is  
equipped with a conductor and a grounding  
plug that allows for grounding the product.  
This plug must be installed appropriately and  
inserted into a socket which is grounded  
in accordance with the local laws and  
regulations.  
• Do not install the product behind a door with  
a lock, sliding door or a door that has a hinge  
against the hinge of the dryer.  
• Do not install or leave this product in  
places where it will be exposed to outdoor  
conditions.  
• Do not tamper with the controls.  
• Do not perform any repair or part replacing  
procedures on the product even if you know  
or have the ability to perform unless it is  
clearly suggested in the operating instructions  
or the published service manual.  
• Inside and exhaust duct of the product must  
be cleaned by the qualified service personnel  
periodically.  
• Wrong connection of grounding conductor  
of the product can cause electric shock. If  
you have any suspect about the grounding  
connection, have it checked by a qualified  
electrician, service representative or service  
personnel.  
You must provide enough ventilation in  
order to prevent gases exiting from devices  
operating with other types of fuels including  
the naked flame from accumulating in the  
room due to the back fire effect.  
• Always clean the lint filter before or after each  
loading.  
• Never operate your dryer without the lint filter  
installed.  
• Do not allow fibre, dust and dirt accumulation  
around the exhaust exit and at adjacent  
areas.  
• Power cable plug must be within easy reach  
after installation.  
• Do not use extension cords, multi-plugs  
or adaptors to connect the dryer to power  
supply in order to decrease the risk of electric  
shock.  
• Do not make any changes on the plug  
supplied with the product. If it is not  
compatible with the socket, have a qualified  
electrician change the socket with a suitable  
one.  
• Items cleaned or washed with gasoil/fuel oil,  
dry-laundry solvents and other combustible  
• Do not reach into the machine when the  
drum is spinning.  
• Unplug the machine when it is not in use.  
• Never wash down the appliance with water!  
 
6 EN  
There is the risk of electric shock! Always  
disconnect by unplugging from the mains  
before cleaning.  
product.  
Children’s safety  
• Electrical appliances are dangerous for  
the children. Keep children away from the  
machine when it is operating. Do not let  
them tamper with the machine.  
• Never touch the plug with wet hands. Never  
unplug by pulling on the cable, always  
pull out by grabbing the plug only. Do not  
operate the machine if the power cable or  
plug is damaged!  
• Packaging materials are dangerous to  
children. Keep the packaging materials out  
of reach of children or dispose them by  
classifying according to waste directives.  
• Do not allow children sit/climb on or enter in  
the product.  
• Children should be supervised to ensure  
that they do not play with the product.  
• Close the loading door when you leave the  
area where the product is located.  
• Never attempt to repair the machine  
yourself, otherwise, you will be putting your  
life and others’ lives in danger.  
• For malfunctions that cannot be solved by  
following the information given in the safety  
instructions:  
Turn off the machine, turn off and contact an  
authorised service agent.  
• Do not stop the dryer before the drying  
cycle comes to an end unless you will  
remove all laundry from the dryer fast in  
order to lay them and dissipate the heat.  
• Remove the door of the drying compartment  
before decommissioning or disposing of the  
product.  
• The final step of the drying cycle (cool-  
down cycle) occurs without applying  
heat to ensure that the items are left at a  
temperature that will not damage them.  
• Fabric softeners or similar products should  
be used as specified by the fabric softener  
instructions.  
• Underwear that contains metal  
reinforcements should not be placed in  
a dryer. Damage to the dryer can result if  
metal reinforcements come loose during  
drying.  
• Check all garments for forgotten lighters,  
coins, metal pieces, needles, etc. before  
loading.  
• At times when your dryer is not in use or  
after the laundry is taken out following the  
completion of drying process, turn off by  
using the On/Off button. In cases when  
the On/Off button is on (while the dryer  
is energized), keep the door of the dryer  
closed.  
Intended use  
• This product has been designed for  
domestic use. It should not be used for  
other purposes.  
• Use the product only for drying laundry that  
are marked accordingly.  
• Dry only those articles in your product that  
are stated in this manual.  
• This product is not intended to be used by  
persons with physical, sensory or mental  
disorders or unlearned or inexperienced  
people (including children) unless they  
are attended by a person who will be  
responsible for their safety or who will  
instruct them accordingly for use of the  
 
7 EN  
3 Installation  
APrior to installation, visually check if the  
product has any defects on it. If so, do not have  
it installed. Damaged products will cause risks  
for your safety.  
product for the first time. Do not leave any  
items inside the drum.  
Under counter installation  
• The product should never be operated  
without the top trim.  
Appropriate installation location  
• Install the product in an environment which  
has no risk of freezing and is in a stable and  
level position.  
• Leave at least 3 cm of space between  
the side and rear walls of the product and  
the walls of the counter/cupboard when  
installing your product under a counter or in  
a cupboard.  
Mounting over a washing machine  
• A fitting device should be used between  
the two machines when installing above  
a washing machine. The bracket must be  
installed by the Authorised Service Agent.  
• Place the product on a firm floor. If it will be  
placed on top of a washing machine, the  
approximate weight of both machines may  
reach 180 kg when they are full. Therefore,  
the floor must be capable of carrying the  
load on it!  
• Operate your product in a well ventilated,  
dust-free environment.  
• Do not block the air ducts in front of and  
under the product with materials such as  
long pile rugs and wooden plinths.  
• Do not place your product on a long pile rug  
or on similar surfaces.  
• Do not install the product behind a door with  
a lock, sliding door or a hinged door which  
can strike the product.  
• Once the product is installed, it should stay  
at the same place where its connections  
have been made. When installing the  
product, make sure that the rear wall of it  
does not touch anywhere (tap, socket, etc.)  
and also pay attention to install the product  
.
Adjusting the feet  
In order to ensure that your machine operates  
more silently and vibration-free, it must stand  
level and balanced on its feet. Balance the  
machine by adjusting the feet.  
BaDt oa npolatcpelawcheetrheeitpwroildl sutcatyopnetrompaonfetnhtely.  
power cable.  
• Keep at least 1.5 cm distance to walls of  
Rotate the feet to adjust until the machine  
stands level and firmly.  
other furniture.  
Removing the transportation safety  
assembly  
ARemove the transportation safety assembly  
before using the product for the first time.  
1. Open the loading door.  
2. There is a nylon bag inside the drum that  
contains a piece of styrofoam. Hold it from  
its section marked with XX.  
3. Pull the nylon towards yourself and remove  
the transportation safety assembly.  
CNever unscrew the adjustable feet from their  
housings.  
First use  
To have the product ready for operation  
before calling the authorised service agent,  
make sure that its location and power supply  
installations are appropriate. If they are  
not, call a qualified electrician to have any  
necessary arrangements carried out.  
• Make sure that the power connections of  
the product are in accordance with the  
instructions given in relevant chapters of this  
manual.  
AMake sure that you have removed  
the transportation safety assembly  
(nylon+styrofoam pieces) before using the  
 
8 EN  
Disposing of packaging material  
Packaging materials are dangerous to children.  
Keep packaging materials in a safe place out  
of reach of children. Packaging materials of  
your product are manufactured from recyclable  
materials. Sort and dispose of them in  
accordance with recycled waste instructions.  
Do not dispose of them with normal domestic  
waste.  
Transportation of the machine  
1. Unplug the machine from the mains.  
2. Remove the water drain and vent  
connections (if any).  
3. Drain water remaining in the machine  
completely before transportation.  
Disposing of the old machine  
Dispose of your old machine in an  
environmentally friendly manner.  
Refer to your local dealer or solid waste  
collection centre in your area to learn how to  
dispose of your machine.  
Before disposing of your old machine, cut off the  
power cable plug and make the loading door  
lock unusable to avoid dangerous conditions to  
children.  
 
9 EN  
4 Electrical Connection  
Make sure that you have an earthed power  
with the symbol or coloured green and yellow  
or green.  
outlet socket rated at 13 amps (minimum).  
2 Connect the blue (neutral) wire to the  
terminal in the plug marked ‘N’ or coloured  
black.  
Attention!  
When installed, the socket must be reachable  
after installation, or a separate switch (which  
can disconnect the two poles) must be used  
in the installation. Check for suitability.  
For a permanent connection, a master switch  
with at least 3mm contact clearance and  
minumum 13 A rating must be used.  
3 Connect the brown (live) wire to the terminal  
in the plug marked ‘Lor coloured red.  
With the alternative plugs a 13A fuse must  
be fitted either in the plug or adaptor or in the  
main fuse box. If in doubt contact a qualified  
electrician.  
Electrical requirements  
Green and yellow  
or green  
Before you insert the plug into the wall socket  
make sure that the voltage and the frequency  
shown in the rating label corresponds to your  
electricity supply.  
We recommend that this appliance be  
connected to the mains supply via a suitable  
switched and fused socket in a readily  
accessible position.  
Should the mains lead of the appliance  
become damaged or need replacing at any  
time, it must be replaced by a special purpose  
made mains lead which can only be obtained  
from a Authorised Service Agent.  
N
L
Blue or black  
Brown or red  
A Warning  
This appliance must be earthed  
Washer/dryer combination  
If the fitted moulded plug is not suitable for  
your socket, then the plug should be cut off  
and an appropriate plug fitted.  
Do not stack washing machine on top of  
the tumble dryer. This would damage both  
appliances and guarantees would become  
void. It is also unsafe to stack an appliance  
on top of another without using a suitable  
and approved stacking kit obtained from the  
manufacturer of the appliances.  
The moulded plug on this appliance  
incorporates a 13A fuse. Should the fuse need  
to be replaced an ASTA approved BS1362  
fuse of the same rating must be used. Do not  
forget to refit the fuse cover. In the event of  
losing the fuse cover, the plug must not be  
used until a replacement fuse cover has been  
fitted. Colour of the replacement fuse cover  
must be the same colour as that visible on the  
pin face of the plug. Fuse covers are available  
from any good electrical store.  
• A special stacking kit is required as an  
optional extra please contact customer  
service.  
In order to avoid hazards, damaged supply  
cord should be replaced by the manufacturer,  
its service agent or similarly qualified people.  
Built-under installation  
This appliance can be installed under a  
worktop.  
A Do not operate without the top cover  
fitted. Risk of injury.  
A Important  
Fitting a different plug  
As the colours of the wires in the mains lead  
of this appliance may not correspond with the  
coloured markings identifying the terminals on  
your plug, proceed as follows:  
1 Connect the green - yellow or green (earth)  
wire to the terminal in the plug marked ‘E’ or  
 
10 EN  
5 Initial preparations for drying  
Things to be done for energy saving:  
• Make sure that you operate the product  
at its full capacity but pay attention to not  
exceeding it.  
• Spin your laundry at the highest speed  
possible when washing them. Thus,  
the drying time is shortened and energy  
consumption is decreased.  
• Pay attention to dry same types of laundry  
together.  
• Follow the instructions in the user manual for  
programme selection.  
A B C D  
Low  
l n m  
o p q  
• Make sure that sufficient clearance is  
provided at the front and rear side of the  
dryer for air circulation. Do not block the grill  
at the front side of the product.  
• Do not open the door of the machine during  
drying unless necessary. If you must certainly  
open the door, pay attention not to keep it  
Laundry unsuitable for drying in the  
open for a long time.  
machine  
• Do not add new (wet) laundry during drying.  
• Lint and fibres released from the laundry to  
the air during the drying cycle are collected in  
the “Lint Filter”. Make sure that you clean the  
filters before or after each drying.  
• Laundry items with metal attachments such  
as belt buckles and metal buttons can  
damage your dryer.  
• Do not dry items such as woollens, silk  
garments and nylon stockings, delicate  
embroidered fabrics, laundry with metal  
accessories and items such as sleeping bags  
in the dryer.  
• In models with condenser, make sure that  
you clean the condenser regularly at least  
once every month or after every 30 drying  
cycles.  
• In vented models, follow the hose connection  
rules in the user manual and pay attention to  
the hose cleaning.  
• Ventilate the room, where the dryer is located,  
well during drying.  
• For power saving in models with lamps, at  
times when your dryer is not in use, keep the  
door closed if the On/Off button is pressed (if  
the dryer is energized).  
• Laundry made of delicate and valuable fabrics  
as well as lace curtains can be creased. Do  
not dry them in the dryer!  
• Do not dry items made of hermetic fibres  
such as pillows and quilts in the dryer.  
• Laundry made of foam or rubber will be  
deformed.  
• Do not dry laundry containing rubber in the  
dryer.  
• Do not dry laundry exposed to petroleum, oil,  
combustible or explosive agents in the dryer  
even if they are washed beforehand.  
• Overly wet laundry or laundry with dripping  
water must not be put into the dryer.  
• Items cleaned or washed with gasoil/fuel oil,  
dry-laundry solvents and other combustible  
or explosive materials as well as the items  
that are contaminated or spotted with such  
materials should not be dried in the product  
since they emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
Laundry suitable for drying in the  
machine  
CAlways follow the suggestions on the laundry  
labels. Dry only the laundry having a label  
stating that they are suitable for drying in  
a dryer and make sure that you select the  
appropriate programme.  
• Do not dry your unwashed laundry in the  
dryer.  
• Items soiled with cooking oils, acetone,  
alcohol, fuel oil, kerosene, stain remover,  
turpentine, paraffin and paraffin removers  
must be washed in hot water with plenty of  
detergent before being dried in the dryer.  
 
11 EN  
• Garments or pillows bolstered with rubber  
foam (latex foam), shower bonnets, water  
resistant textiles, materials with rubber  
reinforcement and rubber foam pads  
should not be dried in the dryer.  
• Do not use fabric softeners and anti-static  
products unless they are recommended by  
the manufacturers of the fabric softener or  
the product.  
• Do not dry the underwear reinforced with  
metal parts in the dryer. If these metal  
reinforcements loosen and break during  
drying, they will damage your dryer.  
Preparing laundry for drying  
• Check all laundry items before loading  
them into the product to make sure that  
there are no lighters, coins, metal items,  
needles and etc. in their pockets or on any  
part of them.  
• Fabric softeners and similar products must  
be used in accordance with the instructions  
of the manufacturer of the relevant  
products.  
• All laundry must be spun at the highest  
spin speed that your washing machine  
allows for the laundry type.  
• Laundry may be tangled after washing.  
Separate your laundry before placing them  
into your dryer.  
Following weights are given as examples.  
Approximate  
Home articles  
weights (g)  
1500  
1000  
500  
Cotton quit covers (double)  
Cotton quit covers (single)  
Bed sheets (double)  
Bed sheets (single)  
Large tablecloths  
Small tablecloths  
Tea napkins  
350  
700  
250  
100  
Bath towels  
700  
Hand towels  
350  
Approximate  
weights (g)  
Garments  
Blouses  
Cotton shirts  
Shirts  
Cotton dresses  
Dresses  
Jeans  
150  
300  
200  
500  
350  
700  
100  
125  
Handkerchiefs (10 pieces)  
T-Shirts  
• Sort your laundry according to their types  
and thicknesses. Dry the same type of  
laundry together. E.g.: fine kitchen towels  
and table cloths dry faster than the thick  
bath towels.  
Loading  
• Open the loading door.  
• Place laundry items loosely into the dryer.  
• Push the loading door to close. Ensure that  
no items are caught in the door.  
Correct load capacity  
AConsider the information in the  
“Programme Selection Table”. Always start  
the programme in accordance with the  
CmAdadxiinmgulmaulnodardyctoapthaecitmy.achine more  
than the level shown in the figure is not  
recommended. Drying performance will  
degrade when the machine is overloaded.  
Furthermore, your dryer and your laundry  
CcPalancebeyoduarmlaaugneddr.y into the drum loosely so  
that they will not get tangled.  
 
12 EN  
6 Selecting a Programme and OperatingYour Machine  
Control panel  
4
1
2
3
7
6
5
1. Filter cleaning warning light  
4. On/Off button  
Warning light turns on when the filter is full.  
2. Programme follow-up indicator  
Used to follow-up the progress of the current  
programme.  
Used to turn on and off the machine.  
5. Programme selection knob  
Used to select a programme.  
6. Start/Pause/Cancel button  
Used to start, pause or cancel the  
programme.  
3. Low temperature  
Used to dry in low temperatures.  
7. Water tank warning light  
Warning light turns on when the water tank is  
full.  
 
13 EN  
Preparing the machine  
1. Plug in your machine.  
2. Place the laundry in the machine.  
3. Press the “On/Off” button.  
CPressing the “On/Off” button does not  
necessarily mean that the programme has  
started. Press “Start/Pause/Cancel” button  
of the machine to start the programme.  
Timer programme selection  
Decide the appropriate time from the table  
below which includes drying temperature in  
degrees. Select the desired time with the timer  
programme selection button.  
Dry at high temperature only  
for cotton laundry. Thick and  
multi layered laundry (E.g.:  
Extra dry  
towels, linens, jeans) are dried  
in a way that they do not  
require ironing before placing  
in the wardrobe.  
Normal laundry (E.g.:  
tablecloths, underwear) are  
Cupboard  
dried in a way that they do not  
dry  
require ironing before placing  
in the drawers.  
Normal laundry (E.g., Shirts,  
dresses) are dried ready to be  
ironed.  
Iron Dry  
C For further programme details, see,  
“Programme Selection Table”  
Main programmes  
Anti-creasing  
A 2-hour anti creasing programme to prevent  
laundry from creasing will be activated if  
you do not take the laundry out after the  
programme is over. This programme rotates  
the laundry in 600-second intervals to prevent  
creasing.  
•Ventilation  
Only ventilation is performed for 10 minutes  
without blowing hot air. You can air your  
clothes that have been kept at closed  
environments for a long time thanks to this  
programme to deodorize unpleasant odors.  
•Timer programmes  
You can select one of the 20 min...105  
min...135 min... timer programmes to achieve  
the final drying level. Dry the cotton laundry  
at high temperatures and synthetic and easy-  
care laundry at low temperatures depending  
on the type of the laundry.  
CYou must press the “Low temperature”  
button for synthetics  
 
14 EN  
Programme selection and consumption table  
EN  
Programme table  
Approximate  
amount of  
remaining  
humidity  
Spin speed in washing  
machine (rpm)  
Drying time  
(minutes)  
Programmes  
Capacity (kg)  
Cottons / Coloreds  
1000  
800  
60 %  
70 %  
60 %  
70 %  
60 %  
70 %  
60 %  
70 %  
135  
150  
90  
7
Cupboard dry  
A
A
1000  
800  
3.5  
7
105  
105  
120  
60  
1000  
800  
Iron dry  
1000  
800  
3.5  
60-90  
Synthetics  
Cupboard dry  
800  
600  
40 %  
50 %  
60  
90  
B
3.5  
Energy consumption values  
Approximate  
amount of  
remaining  
humidity  
Energy  
Spin speed in washing  
machine (rpm)  
Programmes  
Capacity (kg)  
consumption  
value kWh  
Cottons cupboard dry*  
Cottons iron dry  
7
7
1000  
1000  
60 %  
60 %  
4.48  
3.40  
Synthetics cupboard dry  
3.5  
800  
40 %  
1.60  
* : Energy Label standard programme (EN 61121:2005)  
All values given in the table have been fixed according to EN 61121:2005 Standard. These  
values may deviate from the table according to the laundry type, laundry spin speed,  
environmental conditions and voltage fluctuations.  
 
15 EN  
Auxiliary function  
Adding/removing laundry in standby  
Low temperature  
mode  
This function allows for drying at lower  
temperatures and therefore saves energy.  
Warning LED will light up when you select the  
function.  
In order to add or take out laundry after the  
start-up of the programme;  
1. Press the “Start/Pause/Cancel” button to  
switch the machine to “Pause” mode. Drying  
process will stop.  
2. Open the door at Pause position and close it  
again after adding or taking out laundry.  
3. Press “Start/Pause/Cancel” button to start the  
CpArongyralamunmder.y added after the drying process  
was started may cause the already dried  
clothes in the machine intermingle with wet  
clothes and the result will be wet laundry after  
the drying process is over.  
CYou must use this function when you dry  
your synthetic or delicate laundry.  
Warning indicators  
CWarning indicators may differ according to the  
model of your dryer.  
Filter cleaning  
A warning light will turn on to remind filter  
cleaning after the programme finishes.  
CIf the filter cleaning warning light lights up  
continuously, please refer to, “Suggested  
solutions for problems”.  
Water tank  
Child-proof lock  
AWarning LED will light up at the end of  
the programme or when the tank is full  
with water. The machine stops operating  
when this warning LED lights up during a  
programme running. To restart the machine,  
please drain the water in the water tank.  
Press “Start/Pause/Cancel” button to start  
the programme after you have emptied the  
water tank. The warning LED goes off and  
the programme resumes operating.  
Starting the programme  
There is a childproof lock to prevent any  
programme interruption due to the pressing of  
keys while the programme is on. The loading  
door and all keys except the “On/Off” key on the  
panel are deactivated when the child-proof lock  
is active.  
In order to activate the childproof lock, press  
on the “Start/Pause/Cancel” and “Low  
temperature” buttons simultaneously for 3  
seconds.  
To start a new programme after the programme  
is over or to interrupt the programme, the  
childproof lock should be deactivated. To  
deactivate the childproof lock, press the same  
buttons for 3 sec.  
1. Press “Start/Pause/Cancel” button to start  
the programme.  
2. Light of the “Start/Pause/Cancel” button will  
turn on to indicate that the programme has  
started.  
Timer follow-up indicator  
One of the LEDs is on as far as programme runs  
and shows the approximate remaining time.  
Changing the programme after the  
programme has started  
You can use this feature to dry your laundry in  
a different programme after your machine has  
started to run.  
COne of the LEDs on the programme follow-up  
For example;  
indicator starts flashing when the child-proof  
Press and hold the “Start/Pause/Cancel” button  
for about 3 seconds to select “90” minutes  
programme instead of “60” minutes program.  
Select the “90” minutes programme by rotating  
the program knob.  
Press “Start/Pause/Cancel” button to start the  
programme.  
ClCochkildis-parcotoivfalotecdk.is deactivated when the  
machine is restarted by pressing the On/Off  
button.  
Ending the programme through  
canceling  
The programme which is selected first will keep  
on going even if the position of the programme  
selection button is changed. A new programme  
can be selected and started after “Programme  
cancel” is activated in order to change the drying  
programme.  
To can cel any selected programme;  
• Press “Start/Pause/Cancel” button for about  
a duration of 3 seconds. The “Filter cleaning”  
C The program which is selected first will go  
on even if the programme selection button  
is moved and another programme mode  
is selected while the machine is operating.  
You must cancel the ongoing programme in  
order to change the drying programme. (See,  
Ending the programme through canceling)  
 
16 EN  
and “Water tank” warning LEDs as well as the  
“0” warning LED on the programme follow-up  
indicator will light up at the end of this period  
for reminding purposes.  
AAs the inside of the machine will be  
excessively hot when you cancel the  
programme while the machine is running,  
activate the ventilation programme to cool it  
down.  
The machine will not start even if the “Start/  
Pause/Cancel” button is pressed, unless the  
programme selection knob is returned to the  
initial programme. The paused programme  
must be cancelled in order to change the drying  
programme.  
End of programme  
The “Filter cleaning” and “Water tank” warning  
LEDs as well as the “0” warning LED on the  
programme follow-up indicator will light up at the  
end of the programme. The door can be opened  
and the machine becomes ready for a second  
cycle.  
Press the “On/Off” button to shut down the  
machine.  
CA 2-hour anti creasing programme to prevent  
laundry from creasing will be activated if  
you do not take the laundry out after the  
programme has come to an end.  
CClean the filter after each drying (please see,  
Filter cleaning).  
CDrain the water tank after each drying (please  
see, Water tank)  
 
17 EN  
7 Maintenance and cleaning  
*To drain the water tank:  
1-Carefully remove the water tank by opening  
the kick plate cover/pulling the drawer.  
Filter Cartridge / Door Inner Surface  
Lint and fibres released from the laundry to the  
air during the drying cycle are collected in the  
“Filter Cartridge”.  
2-Drain the water in the tank  
CSuch fibre and lint are generally formed  
CdAulwrianygswceleaarningthaenfdiltewraasnhdintgh.e inner surfaces  
CoYof uthceacnocvleeraanfttehreefailtcehr danrydinfgilteprroacreeassb.y  
vacuum cleaner.  
To clean the filter:  
1. Open the loading door.  
2. Remove the cover filter by pulling it up and  
open the filter.  
3-If there is lint accumulation in the funnel of the  
water tank, clean it under running water.  
4-Place the water tank into its seat.  
3. Clean lint, fibre, and cotton raveling by hand  
or with a soft piece of cloth.  
4. Close the filter and place it back into its  
seat.  
C Clogging may arise on the filter surface after  
using your machine for some time; if this  
occurs, wash the filter with water and dry it  
CbCefloeraenutshiengenatgiraeinin.ner surface of the cover  
and door gasket.  
Water tank;  
The moisture in the damp laundry is taken from  
the laundry and condens ed. Drain the water  
tank after each drying cycle or during drying  
when “Water tank” warning light turns on.  
ACondensed water is not drinkable!  
ANever take out the water tank when the  
programme is running!  
If you forget to drain the water tank, your dryer  
will stop during the following drying cycles  
when the water tank is full and the “Water  
tank” warning light will turn on. If this is the  
case, press the “Start/Pause/Cancel” button to  
resume the drying cycle after draining the water  
tank.  
 
18 EN  
4. Clean the condenser by applying  
pressurized water with a shower armature  
and wait until the water drains.  
For the condenser;  
Hot and humid air in the condenser is cooled  
with the cold air from the room. Thus,  
the humid air circulating in your dryer is  
condensed and then pumped into the tank.  
CClean the condenser after every 30 drying  
cycles or once a month.  
To clean the condenser:  
1. If a drying process has been carried out,  
open the door of the machine and wait until  
it cools down.  
5. Place the condenser in its housing. Fasten  
the 2 locks and make sure that they are  
seated securely.  
2. Unlock the 2 condenser locks after opening  
the kick plate.  
6. Close the kick plate cover.  
3. Pull out the condenser.  
 
19 EN  
8 Suggested solutions for problems  
Drying process takes too much time  
• Meshes of the filter may be clogged. Wash with water  
Laundry comes out wet at the end of drying.  
• Meshes of the filter may be clogged. Wash with water.  
• Excessive laundry might have been loaded in. Do not load the dryer in excess.  
Dryer does not switch on or the programme does not start. Dryer is not activated when set.  
• It might have not been plugged in. Make sure that the machine is plugged in.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Programme might have not been set or the «Start/Pause/Cancel» button might have not  
been pressed. Make sure that the programme has been set and it is not in “Pause” mode.  
• «Childproof lock» might have been activated. Deactivate the childproof lock.  
Programme has been interrupted without any cause.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Electricity may be cut off. Press «Start/Pause/Cancel» button to start the programme.  
• Water may be full. Drain the water in the tank.  
Laundry has shrunk, become felted or deteriorated.  
• A programme suitable for the laundry type might have not been used. Dry only the laundry  
which is suitable for drying in dryer after checking the labels on your clothes.  
• Select a programme with suitable low temperature for the laundry type to dry your clothes.  
Drum lightning does not come on. (For models with lamp)  
• Dryer might have not been started by using the «On/Off» button. Make sure that the dryer is  
on.  
• Bulb may have blown. Call the authorized service to replace the bulb.  
“0” LED flashes.  
• The 2-hour anti creasing programme to prevent laundry from creasing might have been  
activated. Turn off the dryer and take out the laundry.  
“0” LED is on.  
• Programme has come to an end. Turn off the dryer and take out the laundry.  
“Filter cleaning” LED is on.  
• Filter might have not been cleaned. Clean the cover filter.  
“Water comes out the cover”  
• Clean the entire inner surface of the cover and door gasket.  
“Cover opens spontaneously.”  
• Push it until you hear that it is closed.  
For products with a condenser:  
“Water tank” warning LED is on.  
• Water may be full. Drain the water in the tank.  
“Condenser cleaning” LED is on.  
• Condenser might have not been cleaned. Clean the filters in the condenser under the kick  
plate.  
ACall an authorized service if the problem persists.  
 
20 EN  
9 Guarantee  
Your new product is guaranteed against the  
cost of breakdown repairs for twelve months  
from the date of the original purchase.  
Important notes  
Your product is designed and built for  
domestic household use only.  
What is covered?  
• The guarantee will be void if the product  
is installed or used in commercial or non-  
residential domestic household premises.  
• The product must be correctly installed,  
located and operated in accordance with  
the instructions contained in the User  
Instructions Booklet provided.  
• Repairs necessary as a result of faulty  
materials, defective components or  
manufacturing defect.  
• The cost of functional replacement parts,  
but excluding consumable  
items.  
• The labour costs of a approved repairer to  
carry out the repair.  
• Professional installation by a qualified  
Electrical Domestic Appliance Installer  
is recommended for all Washing  
What is not covered?  
Transit, delivery or accidental damage or  
misuse and abuse.  
Machines,Tumble Dryers, Dishwashers,  
Dryers and Electric Cookers  
• Cabinet or appearance parts, including  
knobs, flaps, handles or container lids.  
• Accessories or consumable items including  
but not limited to, ice trays, scrapers,  
cutlery baskets, filters and light bulbs.  
• Repairs required as a result of unauthorised  
repair or inexpert installation that fails to  
meet the requirements contained in the  
user instruction book.  
• Gas Cookers must only be installed by a  
Gas safe registered Gas Installer.  
• The guarantee is given only within the  
boundaries of the United Kingdom and the  
Republic of Ireland.  
• The guarantee is applicable only to new  
products and is not transferable if the  
product is resold.  
• Disclaims any liability for incidental or  
consequential damages.  
• Repairs to products used on commercial or  
non-residential household premises.  
• Loss of frozen food in freezers or fridge/  
freezers. (Food loss insurance is often  
included within your household contents  
insurance policy, or may be available  
separately from your retailer).  
• The guarantee does not in anyway diminish  
your statutory or legal rights.  
 
21 EN  
10 Service  
Please keep your purchase receipt or other  
proof of purchase in a safe place; you will  
need to have it should the product require  
attention under guarantee.  
You should also complete the details below;  
it will help us assist you when requesting  
service. (The model number is printed on the  
Instruction Booklet and the serial number  
is printed on the Rating Label affixed to the  
appliance)  
Service once the manufacturers  
guarantee has expired.  
If you have purchased an extended guarantee  
please refer to the instructions contained  
within the extended guarantee agreement  
document. Otherwise please call the  
appropriate number above where service can  
be obtained at a charge.  
Should you experience any difficulty in  
obtaining service please contact the Customer  
Help-Line.  
Tel: 0845 600 4911  
Model No:  
Serial No:  
Retailer:  
Date of purchase:  
For service under guarantee simply telephone  
the appropriate number below.  
UK Mainland & Northern Ireland  
Fridges & Freezers 0845 600 4903  
Electric Cookers 0845 600 4902  
Gas & Dual Fuel Cookers  
Republic of Ireland  
0845 600 4905  
Washing Machines & Tumble Dryers  
0845 600 4906  
All Refrigeration, 01 862 3411  
All Cookers  
Washing Machines & Dryers, Tumble Dryers  
Dishwashers  
Before requesting service please check the  
trouble-shooting guide in the Operating  
Instructions as a charge may be levied where  
no fault is found even though your product  
may still be under guarantee.  
 
22 EN  
 
 

3Com Dishwasher VX710 User Manual
ACCO Brands Paper Shredder GBC GLS28 User Manual
Advantech Computer Hardware PPC 175T User Manual
Agilent Technologies Network Router 35670A User Manual
Aiphone Intercom System TC MC User Manual
Airlink GPS Receiver Raven GPRS User Manual
American Dryer Clothes Dryer GX1 M User Manual
Audiovox Speaker NAV101 User Manual
Bahco Saw Production Cutting Bandsaw User Manual
Bakers Pride Oven Food Warmer MODEL MHC4 8 User Manual