Beko Clothes Dryer DRVS 62 S User Manual

Vented  
Sensor Dryer  
DRVS 62 W  
DRVS 62 S  
 
TABLE OF CONTENTS  
1 Your Dryer  
Progress of programme.....................16  
Changing the programme after  
the programme has started ...............16  
Child-proof lock.................................17  
Ending the programe through  
canceling...........................................17  
Technical Specifications.....................18  
End of programme ............................18  
4
Overview .............................................4  
2 Important Safety  
Instructions  
5
7
3 Installation  
Appropriate installation location ..........7  
Adjusting the feet.................................7  
Ventilation hose and connection (for  
7 Quick instructions for  
daily use  
19  
products equipped with an outlet vent) 7  
Connection to a water drain (for products  
equipped with a condenser ) ...............8  
Destroying the packaging material.......9  
Disposing of the old machine...............9  
8 Maintenance and  
cleaning  
20  
Cover filter ........................................20  
Sensor (models equipped with  
a sensor) ...........................................20  
Water tank (Products equipped  
4 Electrical Connection  
10  
Electrical requirements.......................10  
Fitting a different plug .......................10  
Washer/dryer combination.................10  
with a condenser);.............................20  
For the condenser (products  
equipped with a condenser); .............21  
5 Initial preparations for  
9 Solution suggestions for  
drying  
11  
problems  
22  
23  
24  
25  
Garments suitable for drying in  
the machine.......................................11  
Garments unsuitable for drying in  
the machine.......................................11  
Preparing clothes to be dried.............11  
Correct load capacity ........................11  
Loading door.....................................12  
10 Door Reversal  
11 Guarantee  
12 Service  
6 Selecting a Programme  
and OperatingYour Machine 13  
Control panel.....................................13  
Turning the machine on .....................14  
Programme selection.........................14  
Programme selection and  
consumption table.............................15  
Auxiliary function................................16  
Warning indicators.............................16  
Starting the Programme ....................16  
Download from Www.Somanuals.3co-m.EANll Manuals Search And Download.  
1 Your Dryer  
Overview  
4
2
1
3
5
1- Type label  
2- Control Panel  
3- Lint filter  
4- Power Cord  
5- Adjustable Feet  
Specifications of this appliance may change without notice to improve the quality of the  
product. Figures in this manual are schematic and may not match your product exactly.  
Values stated on the machine labels or in the documentation accompanying it are  
obtained in laboratory in accordance with the relevant standards. Depending on  
operational and environmental conditions of the appliance, values may vary.  
 
4 - EN  
2 Important Safety Instructions  
• This appliance must be grounded. In  
AWARNING:To reduce the risk  
of fire, electric shock, or injury to  
persons when using your appliance,  
follow basic precautions including  
the following:  
the event of malfunction or breakdown,  
grounding will reduce the risk of  
electric shock by providing a path of  
least resistance for electric current.  
This appliance is equipped with a  
cord having an equipment-grounding  
conductor and a grounding plug.  
The plug must be plugged into an  
appropriate outlet that is properly  
installed and grounded in accordance  
with all local codes and ordinances.  
• Read all instructions before using the  
appliance. Otherwise, there may be  
the risk of personal injury or material  
damage. Moreover, any warranty and  
reliability commitment will become void.  
AThis product has been designed  
BWARNING: Improper connection of  
the equipment-grounding conductor  
can result in a risk of electric shock.  
Check with a qualified electrician or  
service represantative or personnel  
if you are in doubt as to whether the  
appliance is properly grounded.  
for home use only.  
Your machine can be operated at  
temperatures between +5°C and  
+35°C.  
• The appliance must not be installed  
behind a lockable door, a sliding door  
or a door with a hinge on the opposite  
side to that of the tumble dryer.  
• Do not install or store this appliance  
where it will be exposed to the weather.  
• Do not tamper with controls.  
• Do not repair or replace any part of  
the appliance or attempt any servicing  
unless specifically recommended in  
the user-maintenance instructions or in  
published user-repair instructions that  
you understand and have the skills to  
carry out.  
• Power cord plug must be within easy  
reach after installation.  
To reduce the risk of fire or electrical  
shock, do not use extension cords,  
multi-plugs or an adapter to connect  
the dryer to electrical mains.  
• Do not modify the plug provided with  
the appliance: if it will not fit the outlet,  
have a proper outlet installed by a  
qualified electrician.  
• If the supply cord is damaged, it must  
be replaced by the manufacturer, its  
service agent or similarly qualified  
persons in order to avoid a hazard.  
• The appliance must not be operated  
unless it is repaired! There is the risk of  
electric shock!  
• Ventilation openings in the base must  
not be obstructed by a carpet, etc.  
• Exhaust air must not be discharged  
into a flue, which is used for exhausting  
fumes from appliances burning gas or  
other fuels.  
• Adequate ventilation has to be provided  
to avoid the back flow of gases into the  
room from appliances burning other  
fuels, including open fires.  
• Unplug the machine when it is not in  
use.  
• Never wash down the appliance with  
water! There is the risk of electric  
shock!  
• Never touch the plug with wet hands.  
• Never pull from the cable to unplug the  
machine.  
• Do not operate the machine if the  
power cord or plug is damaged.  
• Never attempt to repair the machine  
yourself.  
• For malfunctions that cannot be solved  
by information in the operating manual:  
Turn off and unplug the appliance and  
call an authorized service agent.  
Download from Www.Somanuals.5co-m.EANll Manuals Search And Download.  
• Do not dry articles that have been  
previously cleaned in, washed in,  
soaked in or spotted with petrol/  
gasoline, dry-cleaning solvents or other  
flammable or explosive substances as  
they give off vapors that could ignite or  
explode.  
• Do not use the tumble dryer if industrial  
chemicals have been used for cleaning.  
• Do not dry unwashed items in the  
tumble dryer.  
• Items that have been soiled with  
substances such as cooking oil,  
acetone, alcohol, petrol, kerosene,  
spot removers, turpentine, waxes  
and wax removers should be washed  
in hot water with an extra amount of  
detergent before being dried in the  
tumble dryer.  
• Items such as foam rubber (latex foam),  
shower caps, waterproof textiles,  
rubber backed articles and clothes or  
pillows fitted with foam rubber pads  
should not be dried in the tumble dryer.  
• Do not use fabric softeners or products  
to eliminate static unless recommended  
by the manufacturer of the fabric  
softener or product.  
• The appliance may only be used for  
drying of textiles that are marked  
accordingly.  
• Undergarments that contain metal  
reinforcements should not be placed in  
a tumble dryer. Damage to the tumble  
dryer can result if metal reinforcements  
come loose during drying.  
• Check all garments for forgotten  
lighters, coins, metal pieces, needles,  
etc. before loading.  
• Fabric softeners, or similar products,  
should be used as specified by the  
fabric softener instructions.  
AWARNING: Never stop the tumble  
dryer before the end of the drying  
cycle unless all items are quickly  
removed and spread out so that the  
heat is dissipated.  
• Do not reach into the appliance if the  
drum is moving.  
• Do not allow children to play on or in  
the appliance.  
Young children should be supervised  
to ensure that they do not play with the  
appliance.  
• Before the appliance is removed from  
service or discarded, remove the door  
to the drying compartment.  
• Close the loading door when you leave  
the area where the machine is located.  
• This appliance is not intended for use  
by persons (including children) with  
reduced physical, sensory or mental  
capabilities, or lack of experience  
and knowledge, unless they have  
been given supervision or instruction  
concerning use of the appliance by a  
person responsible for their safety.  
• Clean lint screen before or after each  
load.  
• Keep area around the exhaust opening  
and adjacent surrounding areas free  
from the accumulation of lint, dust, and  
dirt.  
• The interior of the appliance and  
exhaust duct should be cleaned  
periodically by qualified service  
personnel.  
• Never use the dryer without the lint filter.  
SAVE THESE INSTRUCTIONS  
• The final part of a tumble dryer cycle  
occurs without heat (cool-down cycle)  
to ensure that the items are left at a  
temperature that ensures that the items  
will not be damaged.  
 
6 - EN  
3 Installation  
Appropriate installation  
C Never unscrew the adjustable feet  
location  
from their housings.  
• Install your machine in environments  
which have no risk of freezing and in a  
stable and level position.  
2 plastic pieces supplied together with  
the Operating Instructions prevent  
• Do not place your machine on a long  
pile rug or on similar surfaces.  
• Operate your machine in a well  
ventilated, dust-free environment.  
• Do not block the air ducts in front of  
and under the machine with materials  
such as long pile rugs or kitchen unit  
plinths.  
your machine from slipping on wet and  
slippery surfaces. To install these plastic  
parts:  
1. Tilt your machine to backwards.  
2. Fit the plastic parts to the front  
adjustable feet. Press on the plastic  
parts to fix them in their places.  
3. Check the balance of your machine  
again and readjust the adjustable feet if  
necessary.  
B Make sure that your machine is not  
placed on the power cable.  
Ventilation hose and  
B Keep at least 3 cm from the edges of  
connection (for products  
other furniture.  
equipped with an outlet vent)  
Ventilation hose assures exhausting of the  
air from inside the machine.  
Under Counter Installation  
• Leave at least 3 cm of space between  
the side and rear walls of the machine  
and the walls of the counter/cupboard  
when installing your machine under a  
counter or in a cupboard. Never use  
the tumble dryer without top plate.  
Vented dryer has 1 air outlet.  
Stainless sheet metal or aluminum pipes  
can be used instead of the hose. The  
diameter of the pipe to be used should  
be minimum 10 cm.  
Maximum hose and pipe lengths are  
given in the table below.  
Adjusting the feet  
Hose  
4 m  
-1.0 m  
-1.8 m  
Pipe  
5 m  
-0.3 m  
-0.6 m  
-2.7 m  
-2.0 m  
Maximum length  
1 elbow 45°  
1 elbow 90°  
1 elbow 90° short  
1 wall passage  
In order to ensure that your machine  
operates more silently and vibration-free,  
it must stand level and balanced on its  
feet. Front feet of your machine can  
be adjusted. Balance the machine by  
adjusting the feet.  
1. Loosen the feet by hand.  
2. Adjust them until the machine stands  
level and firmly.  
-2.0 m  
C Each elbow and other passages  
should be subtracted from the above  
maximum length.  
To connect a ventilation hose;  
1. Connect the air outlet hose to the  
hose spacer piece by turning it anti-  
clockwise.  
2. Make the hose passages as shown  
below.  
C Do not use any tools to loosen the  
adjustable feet. Otherwise, they can be  
damaged.  
Download from Www.Somanuals.7co-m.EANll Manuals Search And Download.  
C Exhaust of humid air from the dryer  
into the room is inconvenient. It may  
damage the walls and furniture in the  
room.  
You can directly send the accumulated  
water out through the water drain hose  
supplied with the machine instead of  
periodically draining the water collected in  
the water tank.  
Connecting the water drain hose;  
1. Remove the hose on the machine by  
pulling it out from its end. Do not use  
any tools to take out the hose. Attach  
the drain hose adaptor to the end of  
this hose.  
2. Connect the special drain hose  
supplied with the machine to the hose  
adaptor fitting.  
C The ventilation hose can be routed  
outdoors via a window or it can be  
connected to an air outlet in the wall  
(see diagram below).  
C Air outlet hose must be extended  
directly to the outdoors. There must  
be a small number of elbows as not to  
hinder air ventilation.  
3. The other end of the drain hose  
can be directly connected to the  
wastewater drain or to the washbasin.  
The fitting must always be secured in  
all types of connections. Your house  
may be flooded if the hose gets out of  
its housing during water discharge.  
C To prevent water accumulation in the  
hose, make sure that it is not folded on  
the floor.  
B The air ventilation hose should not be  
connected to the chimney of a stove or  
a fireplace.  
C When you direct the water drain out,  
“Water Tank” warning LED will light up  
at the end of each programme.  
Important:  
B Do not operate your machine at the  
same time with heaters such as a coal  
or gas stove. Airflow may cause the  
chimney to flare up. Airflow may cause  
the chimney to flame up.  
• The hose should be attached to a  
height of maximum 80 cm.  
You must be careful not the pinch or  
bend the hose.  
• The end of the hose should not be  
bent, it should not be stepped on and  
it must not be folded between the  
drain and the machine.  
Connection to a water drain  
(for products equipped with a  
condenser )  
In products equipped with a condenser  
unit the water accumulated during the  
drying cycle is collected in the water tank.  
You should drain the accumulated water  
after each washing cycle.  
 
8 - EN  
Destroying the packaging  
material  
Packaging material can be dangerous to  
children. Keep the packaging materials  
out of the reach of children or dispose of  
them accordingly. Do not dispose them  
together with normal domestic wastes.  
Packaging materials of your machine are  
manufactured from recyclable materials.  
Disposing of the old machine  
Dispose of your old appliance in an  
environmental friendly manner.  
You may refer to your local agent or  
solid waste collection center in your  
municipality to learn how to dispose of  
your machine.  
Before disposing of your old washing  
machine, cut off the mains plug and  
make the door lock unusable.  
Download from Www.Somanuals.9co-m.EANll Manuals Search And Download.  
4 Electrical Connection  
Built-under installation  
Make sure that you have an earthed  
power outlet socket rated at 13 amps  
(minimum).  
This appliance can be installed under a  
worktop.  
A Only authorised specialists are  
permitted to carry out a built-under  
installation. Risk of electric shock!  
A Important  
Attention!  
If you use your dryer as built-in,  
the socket must be reachable after  
installation, or a separate switch (which  
can disconnect the two poles) must  
be used in the installation. Check for  
suitability.  
Fitting a different plug  
As the colours of the wires in the  
mains lead of this appliance may not  
correspond with the coloured markings  
identifying the terminals on your plug,  
proceed as follows:  
For a permanent connection, a master  
switch with at least 3mm contact  
clearance and minumum 13 A rating  
must be used.  
1 Connect the green - yellow or green  
(earth) wire to the terminal in the plug  
marked ‘E’ or with the symbol or  
coloured green and yellow or green.  
2 Connect the blue (neutral) wire to  
the terminal in the plug marked ‘N’ or  
coloured black.  
3 Connect the brown (live) wire to  
the terminal in the plug marked ‘Lor  
coloured red.  
With the alternative plugs a 13A fuse  
must be fitted either in the plug or  
adaptor or in the main fuse box. If in  
doubt contact a qualified electrician.  
Electrical requirements  
Before you insert the plug into the wall  
socket make sure that the voltage and  
the frequency shown in the rating label  
corresponds to your electricity supply.  
We recommend that this appliance be  
connected to the mains supply via a  
suitable switched and fused socket in a  
readily accessible position.  
Should the mains lead of the appliance  
become damaged or need replacing at  
any time, it must be replaced by a special  
purpose made mains lead which can only  
be obtained from a Authorised Service  
Agent.  
Washer/dryer combination  
Green and yellow  
or green  
A Warning  
This appliance must be earthed  
If the fitted moulded plug is not suitable  
for your socket, then the plug should be  
cut off and an appropriate plug fitted.  
The moulded plug on this appliance  
incorporates a 13A fuse. Should the fuse  
need to be replaced an ASTA approved  
BS1362 fuse of the same rating must  
be used. Do not forget to refit the fuse  
cover. In the event of losing the fuse  
cover, the plug must not be used until a  
replacement fuse cover has been fitted.  
Colour of the replacement fuse cover  
must be the same colour as that visible  
on the pin face of the plug. Fuse covers  
are available from any good electrical  
store.  
N
L
Blue or black  
Brown or red  
Do not stack washing machine on top  
of the tumble dryer. This would damage  
both appliances and guarantees would  
become void. It is also unsafe to stack  
an appliance on top of another without  
using a suitable and approved stacking  
kit obtained from the manufacturer of the  
appliances.  
In order to avoid hazards, damaged  
supply cord should be replaced by the  
manufacturer, its service agent or similarly  
qualified people.  
• A special stacking kit is required as an  
optional extra please contact customer  
service.  
 
10 - EN  
5 Initial preparations for drying  
• Garments made of foam or rubber may  
Garments suitable for drying in  
be deformed.  
the machine  
• Do not dry clothes containing rubber in  
the machine.  
Always follow the advice on the garment  
labels. With this dryer, dry only the  
laundry having a label stating that they  
are suitable for drying in a dryer by  
selecting the appropriate programme.  
• Do not dry clothes exposed to  
petroleum, oil, combustible or explosive  
agents in the machine even if they are  
washed beforehand.  
• Overly wet laundry or laundry with  
dripping water must not be put into the  
machine.  
A B C D  
l n m  
Preparing clothes to be dried  
• All laundry must be spun at the highest  
possible spin speed your washing  
machine allows for the textile type.  
• Laundry may be tangled after washing.  
Separate your laundry before placing  
them into your dryer.  
• Sort your laundry according to their  
types and thicknesses. Dry the same  
type of laundry together. E.g..: fine  
kitchen towels and table cloths dry  
faster than the thick bath towels.  
o p q  
Correct load capacity  
Garments unsuitable for drying  
in the machine  
• Laundry items and attachments made  
of or contain metal, hard plastic and  
similar materials, such as belt buckles,  
jeans, bra wires, buttons and similar  
accessories will damage your machine  
and may cause breakdown. So do not  
place such items in the tumble dryer. If  
you are in doubt, please call Customer  
Help Line.  
• Do not dry items such as woolen, silk  
garments and nylon stockings, delicate  
embroidered fabrics, garments with  
metal accessories and items such as  
sleeping bags in the machine.  
• Garments made of delicate and  
valuable fabrics as well as lace curtains  
can be creased. Do not dry these in  
your machine!  
• Do not dry items made of hermetic  
fibers such as pillows and quilts in the  
drying machine.  
APlease consider the information in the  
“Programme Selection Table”. Always  
start the programme in accordance  
with the maximum load capacity.  
CAdding laundry to the machine  
more than the level shown in the  
figure is not recommended.. Drying  
performance will degrade when the  
machine is overloaded. Furthermore,  
your machine and your clothes might  
be damaged.  
 
11 - EN  
CPlace your garments into the drum  
loosely so that they will not get  
tangled..  
CLarge pieces (E.g.: bed sheets, quilt  
covers, large tablecloths) may bunch-  
up. Stop the machine 1-2 times  
during drying process to separate  
bunched-up laundry.  
Following weights are given as examples.  
Approximate  
Home articles  
weights (gr)  
Cotton quit covers (double)  
Cotton quit covers (single)  
Bed sheets (double)  
Bed sheets (single)  
Large tablecloths  
Small tablecloths  
Tea napkins  
1500  
1000  
500  
350  
700  
250  
100  
700  
350  
Bath towels  
Hand towels  
Approximate  
weights (gr)  
Garments  
Blouses  
Cotton shirts  
Shirt  
Cotton dresses  
Dresses  
Jeans  
150  
300  
200  
500  
350  
700  
100  
125  
Handkerchiefs  
T-Shirts  
Loading door  
• Open the loading door.  
• Place laundry items loosely into the  
machine.  
• Push the loading door to close. Ensure  
that no items are caught in the door.  
 
12 - EN  
6 Selecting a Programme and OperatingYour Machine  
Control panel  
Figure 2  
11  
10  
6
9
Synthetics  
Ready to  
Wear  
Ready to  
Iron  
Cottons  
Timed  
Extra dry  
Programmes  
Ready to Wear  
Ready to Iron  
Delicates  
10 min  
20 min  
Clean Filter  
Drying  
On / Off  
Ready to  
Iron  
Ready to  
Wear  
40 min  
60 min  
Freshen Up  
End / Anticrease  
Buzzer  
Cancel  
Start/  
Pause/  
Cancel  
7
8
6. On/Off button  
13. Time Delay Button *  
* It may change according to the  
specifications of your dryer  
7. Programme selection knob  
8. Start/Pause/Cancel button  
9. Cancel Audio Warning  
10. Programme follow-up indicator  
11. Filter cleaning warning LED  
12. Water tank full warning LED *  
 
13 - EN  
•Synthetics  
Turning the machine on  
You can dry your less durable clothes  
with this programme. It dries at a lower  
temperature compared to the cottons  
programme. It is recommended for your  
synthetic clothes (such as shirts, blouses,  
synthetic/cotton blended garments, etc.).  
Prepare machine for programme  
selection by pressing the “On/Off” button.  
C Pressing the “On/Off” button does not  
necessarily mean that the programme  
has started. Press "Start/Pause/  
Cancel" button of the machine to start  
the programe.  
C Do not dry curtains and lace in your  
machine.  
•Anti-creasing  
Programme selection  
Decide the appropriate programme from  
the table below which includes drying  
temperature in degrees. Select the  
desired programme with the programme  
selection button.  
A 2-hour anti creasing programme to  
prevent laundry from creasing will be  
activated if you do not take the laundry  
out after the programme has come to  
an end. This programme rotates the  
laundry in 60-second intervals to prevent  
creasing.  
Extra dry  
Dry at high  
temperature only for  
cotton laundry. Thick  
and multi layered  
laundry (E.g.: towels,  
linens, jeans) are dried  
in a way that they do  
not require ironing  
before placing in the  
wardrobe.  
Special programmes  
For special cases, there are also extra  
programmes available:  
C Additional programmes may differ  
according to the model of your  
machine.  
•Delicates  
You can dry at a lower temperature your  
very delicate laundry (silk blouses, fine  
underwear, etc.) that are suitable for drying  
or laundry which is advised to be hand-  
washed.  
Ready to  
Wear  
Normal laundry (E.g.:  
tablecloths, underwear)  
are dried in a way that  
they do not require  
ironing before placing  
in the drawers.  
C It is recommended to use a cloth  
bag to avoid certain delicate garments  
and laundry from getting creased  
or damaged. Take your garments  
immediately out of the dryer and hang  
them after the programme ends in  
order to prevent them being creased.  
•Ventilation  
Ready to Iron Normal laundry (E.g.,  
Shirts, dresses) are  
dried ready to be  
ironed.  
C Always select the highest temperature  
required for drying. High temperature  
will ensure energy and time saving.  
Only ventilation is performed for 10  
minutes without blowing hot air. You  
can air your clothes that have been kept  
at closed environments for a long time  
thanks to this programe to deodorize  
unpleasant odors.  
C For further programme details, see,  
“Programme Selection Table”  
Main programmes  
Depending on the type of textile, the  
following main programmes are available:  
•Cottons  
•Timer programmes  
You can select one of the 10 min.,  
20 min., 40 min., 60 min...... timer  
programmes to achieve the desired  
final drying level at low temperatures.  
Programme dries at the selected time  
regardless of the drying level.  
You can dry your durable clothes with  
this programme. Dries at a higher  
temperature. It is recommended to  
use for your cotton items (such as bed  
sheets, quilt cover, underclothing, etc.).  
 
14 - EN  
Programme selection and consumption table  
EN  
2
Program table  
Approximate  
amount of  
remaining humidity  
Spin speed in washing  
machine (rpm)  
Programs  
Capacity (kg)  
Drying time (minutes)  
Cottons / Coloreds  
1200-1000  
900-800  
% 60  
% 70  
% 60  
% 70  
% 60  
% 70  
% 60  
% 70  
110  
130  
6
3
6
3
Ready to Wear  
Ready to Iron  
A
B
1200-1000  
900-800  
80-60  
110-80  
110-80  
110  
1200-1000  
900-800  
1200-1000  
900-800  
60-40  
80-60  
Synthetics  
800  
600  
800  
600  
% 40  
% 50  
% 40  
% 50  
60-40  
80-60  
40-20  
60-40  
3
Ready to Wear  
B
1.5  
Delicates  
Ready to Wear  
1.5  
600  
% 50  
30  
B
Energy consumption values  
Approximate  
amount of  
remaining humidity  
Spin speed in washing  
machine (rpm)  
Energy consumption  
value kWh  
Programs  
Capacity (kg)  
Cottons linen Ready to wear*  
Cottons Ready to iron  
6
6
1000  
1000  
% 60  
% 60  
3.39  
2.90  
Synthetics&Mixed fabrics Ready  
to wear  
3
600  
% 50  
1.80  
* : Energy Label standard programme (EN 61121:2005)  
All values given in the table have been fixed according to EN 61121:2005 Standard.  
These values may deviate from the table according to the laundry type, laundry spin  
speed, environmental conditions and voltage fluctuations.  
 
15 - EN  
Auxiliary function  
Progress of programme  
Progress of a running programme is  
shown through the programme follow-up  
indicator.  
Cancel Audio Warning  
Your machine will send out an audio  
warning when the programme comes to  
an end. If you do not want to hear this  
buzzing, you need to press the “Cancel  
Audio Warning” button. The relevant LED  
will light up when this button is pressed  
and an audio warning will not be given  
when the programme comes to an end.  
At the beginning of every programme  
step, the relevant indicator LED will light  
up and light of the completed step will  
turn off.  
“Drying”:  
- Drying level will be illuminated during  
the whole drying process until the drying  
degree reaches “ Ready to Iron “.  
“ Ready to Iron “:  
C You can select this function either  
before or after the programme starts.  
- Starts to illuminate when the drying  
degree reaches “ Ready to Iron “ step and  
remains illuminated until the next step.  
“ Ready to Wear “:  
Warning indicators  
C Warning indicators may differ  
according to the model of your  
machine.  
- Starts to illuminate when the drying degree  
reaches “ Ready to wear “ step and remains  
Filter cleaning  
illuminated until the next step.  
“Final / Anti-creasing”:  
Awarning LED will light up to remind  
filter cleaning after the programme  
finishes.  
- Illuminates when the programme comes  
to an end and anti-creasing function is  
activated.  
C If the filter cleaning warning LED  
lights up continuously, please refer to,  
“Solution suggestions for problems”.  
Water tank  
C If more than one LED light up or  
flash concurrently, it means there is  
malfunctioning or a failure (please see,  
Solution suggestions for problems).  
Awarning LED will light up at the end  
of the programme or when the tank is full  
with water. The machine stops operating  
when this warning LED lights up during  
a programme running. To restart the  
machine, please drain the water in  
the water tank. Press "Start/Pause/  
Cancel" button to start the programme  
after you have emptied the water tank.  
The warning LED goes off and the  
programme resumes operating.  
Changing the programme after  
the programme has started  
You can use this feature after your machine  
has started to dry your clothes under higher  
or lower temperatures.  
For example;  
Press and hold the “Start/Pause/Cancel”  
button for about 3 seconds to “Cancel”  
the programme in order to select “Extra  
Dry” programme instead of “Iron Dry”  
programme.  
Starting the Programme  
1. Press “Start/Pause/Cancel” button to  
start the programme.  
2. “Start/Pause/Cancel” button will light  
up to indicate that the programme has  
started.  
Select the “Extra Dry” programme by  
rotating the programe knob.  
Press “Start/Pause/Cancel” button to start  
the programme.  
C The programme which is selected first  
will go on even if the programme selection  
button is moved and another programme  
mode is selected while the machine is  
operating. You must cancel the ongoing  
programe in order to change the drying  
programme. (See, Ending the programme  
through canceling)  
 
16 - EN  
Adding/removing laundry in standby  
mode  
Ending the programe through  
In order to add or take out laundry after the  
start-up of the programme;  
canceling  
The programme which is selected first will  
keep on going even if the position of the  
programme selection button is changed.  
A new programme can be selected and  
started after “Programme cancel” is  
activated in order to change the drying  
programme.  
To cancel any selected programme;  
Press “Start/Pause/Cancel” button for  
about a duration of 3 seconds. The “Filter  
cleaning”, “Water tank” and “End/ Anti-  
creasing” warning LEDs will light up at the  
end of this period for reminding purposes.  
1. Press the “Start/Pause/Cancel” button  
to switch the machine to “Pause” mode.  
Drying process will stop.  
2. Open the door at Pause position and  
close it again after adding or taking out  
laundry.  
3. Press “Start/Pause/Cancel” button to start  
the programme.  
CAny laundry added after the drying  
process was started may cause the  
already dried clothes in the machine  
intermingle with wet clothes and the  
result will be wet laundry after the drying  
process is over.  
AAs the inside of the machine will be  
excessively hot when you cancel the  
programme while the machine is running,  
activate the ventilation programme to cool  
it down.  
CLaundry may be added or taken out  
as much as desired during a drying  
process, but as this process will interrupt  
drying continuously, it will extend the  
programme duration and increase  
energy consumption. Therefore, it is  
recommended to add laundry before the  
drying programme is started.  
A If the machine is stopped during any  
drying programme, and if the position  
of the programme selection knob is  
changed, an audio signal will be heard  
(if the “Cancel audio warning” function  
is not selected).  
Child-proof lock  
The machine will not start even if the  
“Start/Pause/Cancel” button is  
There is a childproof lock to prevent any  
programme interruption due to the  
pressing of keys while the programme  
is on. The loading door and all keys  
except the “On/Off” key on the panel are  
deactivated when the child-proof lock is  
active.  
pressed, unless the programme  
selection knob is returned to the initial  
programme. The paused programme  
must be cancelled in order to change  
the drying programme.  
In order to activate the childproof lock,  
press on the “Start/Pause/Cancel” and  
“Cancel audio  
warning” buttons  
simultaneously for 3  
seconds.  
To start a new  
programme after  
the programme is  
over or to interrupt  
the programme, the childproof lock should  
be deactivated. To deactivate the childproof  
lock, press the same buttons for 3 sec.  
C2 beeps when activating and 1 beep  
when deactivating the child-proof lock is  
heard.  
 
17 - EN  
End of programme  
The “End/Anti-creasing”, “Filter cleaning”  
and “Water tank” warning LEDs on the  
programme follow up indicator will light up  
when the programme comes to an end.  
The door can be opened and the machine  
becomes ready for a second cycle.  
Press the “On/Off” button to shut down the  
machine.  
C A 2-hour anti creasing programme to  
prevent laundry from creasing will be  
activated if you do not take the laundry  
out after the programme has come to an  
end.  
C Clean the filter after each drying (please  
see, Filter cleaning).  
C Drain the water tank after each drying  
(please see, Water tank)  
Technical Specifications  
EN  
Height (adjustable)  
85.0 cm  
59.5 cm  
54 cm  
6 kg  
Width  
Depth  
Capacity (max.)  
Weight (net)  
31 kg  
Voltage  
Rated power input  
See type label  
Model code  
Type label is located behind the loading door.  
This appliances packaging material is recyclable. Help recycle it and protect the  
environment by dropping it off in the municipal receptacles provided for this purpose.  
Your appliance also contains a great amount of recyclable material. It is marked with  
this label to indicate the used appliances that should not be mixed with other waste.  
This way, the appliance recycling organised by your manufacturer will be done under  
the best possible conditions, in compliance with European Directive 2002/96/EC on  
Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used  
appliance collection points closest to your home. We thank you doing your part to protect the  
environment.  
 
18 - EN  
7 Quick instructions for daily use  
Preparation and starting  
1. Press the “On/Off” button to shut  
down the machine.  
1. Press the “On/Off” button.  
2. Place the laundry in the machine.  
3. Select the programme.  
2. Take out the laundry from the machine.  
3. Check if there are any foreign  
substances in the machine.  
4. Close the loading door.  
5. Press “Start/Pause/Cancel” button.  
4. Clean the filter after drying. Also drain  
the water tank in models equipped  
with a condenser.  
Cancelling a programme  
A new programme can be selected and  
started after “Programme cancel” is  
activated in order to change the drying  
programme.  
In order to cancel the selected  
programme, press “Start/Pause/Cancel”  
button for about 3 seconds. The “Filter  
cleaning”, “Water tank” and “End/ Anti-  
creasing” warning LEDs will light up at the  
end of this period for reminding purposes.  
Adding laundry  
In order to add laundry after the start-up  
of the programme:  
1. Press “Start/Pause/Cancel” button.  
2. Open the loading door and put the  
laundry in.  
3. Close the loading door.  
4. Press “Start/Pause/Cancel” button to  
start the programme.  
Changing the programme after the  
programme has started  
You can use this feature after your  
machine has started to dry your clothes  
under higher or lower temperatures.  
Press and hold the “Start/Pause/Cancel”  
button for about 3 seconds to switch  
the machine into the “Cancel” status in  
order to change the programme. Change  
the programme and press “Start/Pause/  
Cancel” button to start it.  
After the programme is finished  
The “End/Anti-creasing” and “Filter  
cleaning” warning LEDs as well as “Water  
tank” warning LED in some models on  
the programme follow up indicator will  
light up when the programme comes to  
an end. The door can be opened and the  
machine becomes ready for a second  
cycle.  
 
19 - EN  
8 Maintenance and cleaning  
Cover filter  
A
Never use solvents, cleaning  
agents or substances alike when  
cleaning as these might cause fire and  
explosion!  
Lint and fibres released from the laundry  
to the air during the drying cycle are  
collected in the “Cover Filter”.  
C
Such fibre and lint are generally  
formed during wearing and washing.  
Always clean the filter after each  
Water tank (Products equipped  
C
with a condenser);  
Drying process.  
The moisture in the damp laundry is taken  
from the laundry and condensed. Drain  
the water tank after each drying cycle or  
during drying when “Water tank” warning  
LED comes on.  
C
You can clean the filter and filter  
area by vacuum cleaner.  
A
Condensed water is not  
drinkable!  
CYou can use the water in the water  
tank in your steam irons or air  
humidifiers.  
A
Never take out the water tank  
when the programme is running!  
Water tank may be located in two  
different places as indicated below,  
depending on the model of your machine.  
-
-
For Filter cleaning;  
1 Take out the cover  
2 Remove the cover filter by pulling it up  
and open the filter.  
3 Clean lint, fibre, and cotton raveling by  
hand or with a soft piece of cloth.  
4 Close the filter and place it back into its  
seat.  
Inside the drawer on the panel  
Inside the kick plate cover  
If you forget to drain the water tank, your  
machine will stop during the following  
drying cycles when the water tank is  
full and the “Water tank” warning LED  
will light on. If this is the case, press the  
“Start/Pause/Cancel” button to resume  
the drying cycle after draining the water  
tank.  
Sensor (models equipped with  
a sensor)  
There are humidity sensors in your  
machine that detect whether the laundry  
is dry or not.  
In order to drain the water tank;  
1 Carefully remove the water tank by  
opening the kick plate cover/pulling the  
drawer.  
For sensor cleaning;  
1 Open the cover of your machine.  
2 Allow the machine to cool off if drying  
has been carried out.  
2 Drain the water by opening the water  
tank cover.  
3 Wipe the metal sensors with a soft  
cloth, dampened with vinegar and dry  
them.  
3 If there is lint accumulation in the water  
tank cover, clean it and press to close.  
4 Place the water tank into its seat.  
CClean metal sensors 4 times a year.  
 
20 - EN  
For the condenser (products  
equipped with a condenser);  
Hot and humid air in the condenser is  
cooled with the cold air from the room.  
Thus, the humid air circulating in your  
machine is condensed and then pumped  
into the tank.  
CClean the condenser after every 20  
drying cycles or once a month.  
To clean the condenser;  
1 If a drying process has been carried  
out, open the door of the machine and  
wait until it cools down.  
2 Unlock the 4 condenser locks after  
opening the kick plate.  
3 Pull out the condenser.  
4 Clean the condenser with pressurized  
water and wait until the water drains.  
5 Replace the condenser with the side  
labeled “Top” facing upwards. Lock the  
4 condenser locks. Make sure that the  
red lock on the upper right corner is  
engaged securely.  
6 Close the kick plate cover.  
Close properly and  
check the locking  
latchs?  
 
21 - EN  
9 Solution suggestions for problems  
Problem  
Cause  
Explanation / Suggestion  
Drying process  
takes too much  
time.  
Cover filter and filter drawer might  
have not been cleaned.  
* Clean the cover filter and Filter drawer.  
* Cover filter and filter drawer might  
have not been cleaned.  
* Excessive laundry might have been  
loaded in.  
Laundry come out  
wet at the end of  
drying.  
* Clean the cover filter and Filter drawer.  
* Do not overload the machine.  
* It might have not been plugged in.  
* The loading door may be ajar.  
* Make sure that the machine is plugged in.  
Machine does not * Programme might have not been set * Make sure that the loading door is  
switch on or the  
programme does  
or the “Start/Pause/Cancel” button  
might have not been pressed.  
properly closed.  
* Make sure that the programme has been  
set and it is not in “Pause” mode.  
* Deactivate the childproof lock.  
not start. Machine * “Childproof lock” might have been  
is not activated  
when set.  
activated.  
* The condenser cover on the models * Make sure that the condenser cover and  
with a condenser might not be closed the red lock is closed securely.  
securely.  
* Make sure that the loading door is  
Programme has  
been interrupted  
without any cause.  
* The loading door may be ajar.  
* Electricity may be cut off.  
properly closed.  
* Press “Start/Pause/Cancel” button to  
start the programme.  
* Dry only the laundry which is suitable for  
drying in your machine after checking the  
* A programme suitable for the laundry labels on your clothes.  
type might have not been used. * Select a programme with suitable low  
Laundry has  
shrunk, become  
felted or  
deteriorated.  
temperature for the laundry type to dry your  
clothes.  
Drum lightning  
does not come on. * The machine might have not been  
* Make sure that the machine is On.  
* Call the authorized service to replace the  
bulb.  
(for models  
equipped with a  
lamp)  
started by using the On/Off button.  
* Bulb may have blown.  
“Final / Anti-  
creasing” LED  
flashes.  
* The 2-hour anti creasing programme  
to prevent laundry from creasing might  
have been activated.  
* Turn off the machine and take out the  
laundry.  
“Final / Anti-  
creasing” LED is  
on.  
* Turn off the machine and take out the  
laundry.  
* Program has come to an end.  
* A heat sensor failure has occurred.  
Machine ends the programme without  
heating.  
The “Drying” LED  
flashes.  
* Turn off the machine and take out the  
laundry. Call your authorized service.  
“Filter cleaning”  
LED flashes.  
* Filter might have not been cleaned.  
* Clean the cover filter.  
Also for products equipped with a condenser  
* Water may be full.  
“Water tank”  
* Anti-creasing programme might be  
* Drain the water in the water tank.  
warning LED is on.  
running.  
“Condenser  
cleaning” LED is  
on.  
* Filter drawer/Condenser might have * Clean the filters in the condenser/filter  
not been cleaned. drawer under the kick plate.  
ACall an authorized service agent if the problem persists.  
 
22 - EN  
10 Door Reversal  
1. Unplug the dryer.  
2. Open the door.  
3. Turn the contact pin in the upper part of door by 90° in the anti-clockwise  
direction and remove it.  
4. Unscrew the 2 screws of each door hinge and remove the door.  
5. Removing the door lock: Using a flat screwdriver release the snap-fitted door  
lock.  
6. Remove 2 plugs for the hinges and one for the door-lock on the opposite side.  
7. Insert the door lock system on the opposite side of the hinge and be sure it is  
properly fitted.  
8. Reverse the door:  
Fit the door on the opposite side using 4 screws removed. Fix the contact pin into  
the top side of the door by turning 90° in the clockwise direction.  
 
23 - EN  
11 Guarantee  
Electrical Domestic Appliance Installer  
is recommended for all Washing  
Machines,Tumble Dryers, Dishwashers,  
Dryers and Electric Cookers  
Your new product is guaranteed against  
the cost of breakdown repairs for twelve  
months from the date of the original  
purchase.  
• Gas Cookers must only be installed by  
a CORGI (or BORD GAIS) registered Gas  
Installer.  
What is covered?  
• The guarantee is given only within the  
boundaries of the United Kingdom and  
the Republic of Ireland.  
• Repairs necessary as a result of faulty  
materials, defective components or  
manufacturing defect.  
• The cost of functional replacement  
parts, but excluding consumable items.  
• The labour costs of a approved repairer  
to carry out the repair.  
• The guarantee is applicable only to new  
products and is not transferable if the  
product is resold.  
• disclaims any liability for incidental or  
consequential damages.  
• The guarantee does not in anyway  
diminish your statutory or legal rights.  
What is not covered?  
Transit, delivery or accidental damage  
or misuse and abuse.  
• Cabinet or appearance parts, including  
knobs, flaps, handles or container lids.  
• Accessories or consumable items  
including but not limited to, ice trays,  
scrapers, cutlery baskets, filters and light  
bulbs.  
• Repairs required as a result of  
unauthorised repair or inexpert installation  
that fails to meet the requirements  
contained in the user instruction book.  
• Repairs to products used on  
commercial or non-residential household  
premises.  
• Loss of frozen food in freezers or fridge/  
freezers. (Food loss insurance is often  
included within your household contents  
insurance policy, or may be available  
separately from your retailer).  
Important notes  
Your product is designed and built for  
domestic household use only.  
• The guarantee will be void if the product  
is installed or used in commercial or non-  
residential domestic household premises.  
• The product must be correctly installed,  
located and operated in accordance with  
the instructions contained in the User  
Instructions Booklet provided.  
• Professional installation by a qualified  
 
24 - EN  
12 Service  
UK Mainland & Northern Ireland  
Please keep your purchase receipt  
or other proof of purchase in a safe  
place; you will need to have it should  
the product require attention under  
guarantee.  
You should also complete the details  
below; it will help us assist you when  
requesting service. (The model number  
is printed on the Instruction Booklet and  
the serial number is printed on the Rating  
Label affixed to the appliance)  
Fridges & Freezers 0845 600 4903  
Electric Cookers 0845 600 4902  
Gas & 0845 600 4905  
Dual Fuel Cookers  
Washing Machines & Dryers  
Tumble Dryers 0845 600 4906  
Model No:  
Serial No:  
Retailer:  
Date of purchase:  
Republic of Ireland  
All Refrigeration, 01 862 3411  
All Cookers  
Washing Machines & Dryers, Tumble  
Dryers Dishwashers  
Before requesting service please  
check the trouble-shooting guide in the  
Operating Instructions as a charge may  
be levied where no fault is found even  
though your product may still be under  
guarantee.  
Service once the manufacturers  
guarantee has expired.  
If you have purchased an extended  
guarantee please refer to the instructions  
contained within the extended guarantee  
agreement document. Otherwise please  
call the appropriate number above where  
service can be obtained at a charge.  
Should you experience any difficulty in  
obtaining service please contact the  
Customer Help-Line.  
Tel: 0845 600 4911  
For service under guarantee simply  
telephone the appropriate number below.  
 
25 - EN  
 
26 - EN  
 
 

AB Soft Battery Charger CTEK XS 800 User Manual
AB Soft Network Router TDW 33 User Manual
Accton Technology Switch 12i User Manual
Aiphone Wireless Office Headset B User Manual
Allstar Products Group Automobile Parts MH5011S User Manual
Alpine Car Amplifier MRD F752 User Manual
Alto Shaam Refrigerator QC 100 User Manual
Avital Automobile Alarm MAXX1 User Manual
Behringer Electronic Keyboard EG2080 RW BK User Manual
Behringer Stereo Amplifier BG412V User Manual