Beko Washer Dryer WMP652W User Manual

Automatic  
washing machine  
WMP652W  
 
TABLE OF CONTENTS  
Additional programmes . . . . . . . . . . . . 20  
Special programmes . . . . . . . . . . . . . . 21  
Temperature selection . . . . . . . . . . . . . 21  
Spin speed selection . . . . . . . . . . . . . . 21  
Programme and consumption table. . . 22  
Auxiliary function selection. . . . . . . . . . 23  
Starting the programme. . . . . . . . . . . . 24  
Child Lock. . . . . . . . . . . . . . . . . . . . . . 24  
Progress of programme. . . . . . . . . . . . 25  
Loading door lock . . . . . . . . . . . . . . . . 25  
Changing the selections after programme  
has started . . . . . . . . . . . . . . . . . . . . . 25  
Cancelling the programme. . . . . . . . . . 25  
End of programme . . . . . . . . . . . . . . . 26  
1 Your washing machine  
4
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4  
Technical specifications . . . . . . . . . . . . . 5  
2 Important safety  
instructions  
6
General safety . . . . . . . . . . . . . . . . . . . . 6  
Intended use . . . . . . . . . . . . . . . . . . . . . 6  
Children's safety . . . . . . . . . . . . . . . . . . 6  
3 Installation  
8
Appropriate installation location . . . . . . . 8  
Removing packaging reinforcement. . . . 8  
Removing the transportation locks. . . . . 8  
Connecting water supply. . . . . . . . . . . . 9 6 Maintenance and cleaning27  
Connecting to the drain . . . . . . . . . . . . 10  
Adjusting the feet. . . . . . . . . . . . . . . . . 10  
Cleaning the detergent drawer. . . . . . . 27  
Cleaning the loading door and the  
Electrical connection . . . . . . . . . . . . . . 10  
First use . . . . . . . . . . . . . . . . . . . . . . . 12  
Disposing of packaging material . . . . . 12  
Transportation of the product. . . . . . . . 12  
Disposing of the old product . . . . . . . . 12  
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning the body and control panel . . 27  
Cleaning the water intake filters . . . . . . 27  
Draining remaining water and cleaning the  
pump filter . . . . . . . . . . . . . . . . . . . . . . 28  
4 Preparation  
13  
7 Troubleshooting  
8 Guarantee  
30  
36  
37  
Things to be done for energy saving . . 13  
Sorting the laundry . . . . . . . . . . . . . . . 13  
Preparing laundry for washing . . . . . . . 13  
Correct load capacity . . . . . . . . . . . . . 14  
Loading the laundry. . . . . . . . . . . . . . . 14  
Using detergent and softener . . . . . . . 15  
Tips for efficient washing . . . . . . . . . . . 18  
9
Service  
5 Operating the product  
19  
Control panel. . . . . . . . . . . . . . . . . . . . 19  
Preparing the machine. . . . . . . . . . . . . 19  
Programme selection. . . . . . . . . . . . . . 19  
Main programmes . . . . . . . . . . . . . . . 20  
Download from Www.Somanuals.3com. All Manuals Search And Download.  
EN  
1 Your washing machine  
Overview  
8
1
2
3
7
6
4
5
1- Power cable  
2- Top panel  
3- Control panel  
4- Filter cap  
5- Adjustable feet  
6- Loading door  
7- Detergent drawer  
8- Drain hose  
 
4
EN  
Technical specifications  
Models  
WMP652W  
Maximum dry laundry capacity (kg)  
Height (cm)  
6
84  
Width (cm)  
60  
Depth (cm)  
50  
Net weight ( 4 kg.)  
Electrical input (V/Hz)  
Total current (A)  
69  
230 V / 50Hz  
10  
Total power (W)  
2200  
1500  
1.35  
0.25  
Spin speed (rpm max.)  
Stand-by mode power (W)  
Off-mode power (W)  
Technical specifications may be changed without prior notice to improve the quality  
of the product.  
C
Figures in this manual are schematic and may not match the product exactly.  
Values stated on the product labels or in the documentation accompanying it  
are obtained in laboratory conditions in accordance with the relevant standards.  
Depending on operational and environmental conditions of the product, these  
values may vary.  
C
C
Download from Www.Somanuals.5com. All Manuals Search And Download.  
EN  
2 Important safety instructions  
Never open the loading door or  
remove the filter while there is still  
water in the drum. Otherwise, risk of  
flooding and injury from hot water will  
occur.  
Do not force open the locked loading  
door. The loading door will be ready  
to open just a few minutes after the  
washing cycle comes to an end.  
In case of forcing the loading door  
to open, the door and the lock  
mechanism may get damaged.  
Unplug the product when not in use.  
Never wash the product by spreading  
or pouring water onto it! There is the  
risk of electric shock!  
This section contains safety instructions  
that will help protect from risk of personal  
injury or property damage. Failure to  
follow these instructions shall void any  
warranty.  
General safety  
This product should not be used  
by persons with physical, sensory  
or mental disorders or unlearned  
or inexperienced people (including  
children) unless they are attended by  
a person who will be responsible for  
their safety or who will instruct them  
accordingly for use of the product.  
Never place the product on a carpet-  
covered floor; otherwise, lack of  
airflow beneath the machine will  
cause electrical parts to overheat.  
This will cause problems with your  
product.  
Never touch the plug with wet hands!  
Never unplug by pulling on the cable,  
always pull out by grabbing the plug.  
Use detergents, softeners and  
supplements suitable for washing  
machines only.  
Do not operate the product if the  
power cable / plug is damaged. Call  
the Authorized Service Agent.  
Have a qualified electrician connect  
a 16-Ampere fuse to the installation  
location of the product.  
If the product has a failure, it should  
not be operated unless it is repaired  
by the Authorized Service Agent.  
Follow the instructions on the textile  
tags and on the detergent package.  
The product must be unplugged  
during installation, maintenance,  
cleaning and repairing procedures.  
Always have the installation and  
repairing procedures carried out  
by the Authorized Service Agent.  
Manufacturer shall not be held  
liable for damages that may arise  
from procedures carried out by  
unauthorized persons.  
There is the risk of electric shock!  
This product is designed to resume  
operating in the event of powering  
on after a power interruption. If you  
wish to cancel the programme, see  
"Cancelling the programme" section.  
Connect the product to a grounded  
outlet protected by a fuse complying  
with the values in the "Technical  
specifications" table. Do not neglect  
to have the grounding installation  
made by a qualified electrician. Our  
company shall not be liable for any  
damages that will arise when the  
product is used without grounding in  
accordance with the local regulations.  
The water supply and draining hoses  
must be securely fastened and remain  
undamaged. Otherwise, there is the  
risk of water leakage.  
Intended use  
This product has been designed for  
domestic use. It is not suitable for  
commercial use and it must not be  
used out of its intended use.  
The product must only be used for  
washing and rinsing of laundry that  
are marked accordingly.  
The manufacturer waives any  
responsibility arisen from incorrect  
usage or transportation.  
Children's safety  
Electrical products are dangerous for  
the children. Keep children away from  
the product when it is in use. Do not  
 
6
EN  
let them to tamper with the product.  
Use child lock to prevent children  
from intervening with the product.  
Do not forget to close the loading  
door when leaving the room where  
the product is located.  
Store all detergents and additives in a  
safe place away from the reach of the  
children.  
Download from Www.Somanuals.7com. All Manuals Search And Download.  
EN  
3 Installation  
Refer to the nearest Authorised Service  
Agent for installation of the product. To  
make the product ready for use, review  
the information in the user manual and  
make sure that the electricity, tap water  
supply and water drainage systems are  
appropriate before calling the Authorized  
Service Agent. If they are not, call a  
Removing packaging  
reinforcement  
Tilt the machine backwards to remove  
the packaging reinforcement. Remove the  
packaging reinforcement by pulling the  
ribbon.  
qualified technician and plumber to have  
any necessary arrangements carried out.  
Preparation of the location and  
C
electrical, tap water and waste water  
installations at the place of installation  
is under customer's responsibility.  
Installation and electrical connections  
B
of the product must be carried out  
by the Authorized Service Agent.  
Manufacturer shall not be held  
liable for damages that may arise  
from procedures carried out by  
unauthorized persons.  
Prior to installation, visually check if  
A
the product has any defects on it. If  
so, do not have it installed. Damaged  
products cause risks for your safety.  
Removing the  
transportation locks  
Do not remove the transportation  
Make sure that the water inlet and  
A
C
locks before taking out the packaging  
reinforcement.  
discharge hoses as well as the power  
cable are not folded, pinched or  
crushed while pushing the product  
into its place after installation or  
cleaning procedures.  
Remove the transportation safety  
A
bolts before operating the washing  
machine, otherwise, the product will  
be damaged.  
Appropriate installation location  
1. Loosen all the bolts with a spanner  
until they rotate freely (C).  
Place the machine on a rigid floor.  
Do not place it on a long pile rug or  
similar surfaces.  
Total weight of the washing machine  
and the dryer -with full load- when  
they are placed on top of each other  
reaches to approx. 180 kilograms.  
Place the product on a solid and flat  
floor that has sufficient load carrying  
capacity!  
2. Remove transportation safety bolts by  
turning them gently.  
Do not place the product on the  
power cable.  
Do not install the product at places  
where temperature may fall below  
0ºC.  
Place the product at least 1 cm away  
from the edges of other furniture.  
 
8
EN  
will get damaged or the product will  
switch to protection mode and will not  
operate.  
Do not use old or used water inlet  
hoses on the new product. It may  
cause stains on your laundry.  
A
1. Connect the special hoses supplied  
with the product to the water inlets  
on the product. Red hose (left) (max.  
90 ºC) is for hot water inlet, blue hose  
(right) (max. 25 ºC) is for cold water  
inlet.  
3. Attach the plastic covers supplied in  
the User Manual bag into the holes on  
the rear panel. (P)  
Keep the transportation safety bolts  
C
in a safe place to reuse when the  
washing machine needs to be moved  
again in the future.  
Never move the product without the  
transportation safety bolts properly  
fixed in place!  
C
Ensure that the cold and hot water  
A
connections are made correctly when  
installing the product. Otherwise, your  
laundry will come out hot at the end  
of the washing process and wear out.  
2. Tighten all hose nuts by hand. Never  
use a wrench when tightening the  
nuts.  
Connecting water supply  
The water supply pressure required  
C
to run the product is between 1 to 10  
bars (0.1 – 10 MPa). It is necessary  
to have 10 – 80 liters of water flowing  
from the fully open tap in one minute  
to have your machine run smoothly.  
Attach a pressure reducing valve if  
water pressure is higher.  
If you are going to use the double  
C
water-inlet product as a single (cold)  
water-inlet unit, you must install the  
supplied stopper to the hot water  
valve before operating the product.  
(Applies for the products supplied  
with a blind stopper group.)  
3. Open the taps completely after  
making the hose connection to check  
for water leaks at the connection  
points. If any leaks occur, turn off the  
tap and remove the nut. Retighten  
the nut carefully after checking the  
seal. To prevent water leakages and  
damages caused by them, keep the  
taps closed when the machine is not  
in use.  
If you want to use both water inlets  
C
of the product, connect the hot water  
hose after removing the stopper and  
gasket group from the hot water  
valve. (Applies for the products  
supplied with a blind stopper group.)  
Models with a single water inlet  
A
should not be connected to the hot  
water tap. In such a case the laundry  
Download from Www.Somanuals.9com. All Manuals Search And Download.  
EN  
an appropriate clamp as not to come  
off and leak.  
Connecting to the drain  
The end of the drain hose must be  
directly connected to the wastewater  
drain or to the washbasin.  
Adjusting the feet  
In order to ensure that the product  
A
Your house will be flooded if the  
hose comes out of its housing  
during water discharge. Moreover,  
there is risk of scalding due to high  
washing temperatures! To prevent  
such situations and to ensure smooth  
water intake and discharge of the  
machine, fix the end of the discharge  
hose tightly so that it cannot come  
out.  
operates more silent and vibration-  
free, it must stand level and balanced  
on its feet. Balance the machine by  
adjusting the feet. Otherwise, the  
product may move from its place  
and cause crushing and vibration  
problems.  
A
The hose should be attached to a  
height of at least 40 cm, and 100 cm  
at most.  
In case the hose is elevated after  
laying it on the floor level or close  
to the ground (less than 40 cm  
above the ground), water discharge  
becomes more difficult and the  
laundry may come out excessively  
wet. Therefore, follow the heights  
described in the figure.  
1. Loosen the lock nuts on the feet by  
hand.  
2. Adjust the feet until the product  
stands level and balanced.  
3. Tighten all lock nuts again by hand.  
To prevent flowing of dirty water back  
into the machine and to allow for easy  
discharge, do not immerse the hose  
end into the dirty water or drive it in  
the drain more than 15 cm. If it is too  
long, cut it short.  
The end of the hose should not be  
bent, it should not be stepped on  
and the hose must not be pinched  
between the drain and the machine.  
If the length of the hose is too short,  
use it by adding an original extension  
hose. Length of the hose may not be  
longer than 3.2 m. To avoid water leak  
failures, the connection between the  
extension hose and the drain hose of  
the product must be fitted well with  
Do not use any tools to loosen the  
A
lock nuts. Otherwise, they will get  
damaged.  
Electrical connection  
Connect the product to a grounded outlet  
protected by a fuse complying with the  
values in the "Technical specifications"  
table. Our company shall not be liable  
 
10  
EN  
for any damages that will arise when the  
product is used without grounding in  
accordance with the local regulations.  
fuse cover has been fitted. Colour of the  
replacement fuse cover must be the same  
colour as that visible on the pin face of the  
plug. Fuse covers are available from any  
good electrical store.  
Connection must comply with national  
regulations.  
Power cable plug must be within easy  
reach after installation.  
The voltage and allowed fuse or  
breaker protection are specified in  
the “Technical specifications” section.  
If the current value of the fuse or  
breaker in the house is less than 13  
Amps, have a qualified electrician  
install a 13 Amp fuse.  
Important  
Fitting a different plug  
As the colours of the wires in the mains  
lead of this appliance may not correspond  
with the coloured markings identifying  
the terminals on your plug, proceed as  
follows:  
1
Connect the green - yellow or green  
(earth) wire to the terminal in the plug  
marked ‘E’ or with the symbol f or  
coloured green and yellow or green.  
Connect the blue (neutral) wire to the  
terminal in the plug marked ‘N’ or  
coloured black.  
Connect the brown (live) wire to the  
terminal in the plug marked ‘Lor  
coloured red.  
The specified voltage must be equal  
to your mains voltage.  
Do not make connections via  
extension cables or multi-plugs.  
Damaged power cables must be  
replaced by the Authorized Service  
Agents.  
2
3
B
Electrical requirements  
Before you insert the plug into the wall  
socket make sure that the voltage and  
the frequency shown in the rating label  
corresponds to your electricity supply.  
We recommend that this appliance be  
connected to the mains supply via a  
suitable switched and fused socket in a  
readily accessible position.  
With the alternative plugs a 13A fuse must  
be fitted either in the plug or adaptor or in the  
main fuse box. If in doubt contact a qualified  
electrician.  
Should the mains lead of the appliance  
become damaged or need replacing at  
any time, it must be replaced by a special  
purpose made mains lead which can only  
be obtained from a Authorised Service  
Agent.  
BThis appliance must be earthed  
If the fitted moulded plug is not suitable  
for your socket, then the plug should be  
cut off and an appropriate plug fitted.  
Destroy the old plug, which is cut off as  
a plug with a bared cord could cause a  
shock hazard if inserted into a socket  
elsewhere in the house.  
The moulded plug on this appliance  
incorporates a 13A fuse. Should the fuse  
need to be replaced an ASTA approved  
BS1362 fuse of the same rating must be  
used. Do not forget to refit the fuse cover.  
In the event of losing the fuse cover, the  
plug must not be used until a replacement  
 
11  
EN  
2. Remove water drain and water supply  
connections.  
3. Drain the remaining water in the  
product completely; see, "Draining  
remaining water and cleaning the  
pump filter".  
4. Install transportation safety bolts  
in the reverse order of removal  
procedure; see, "Removing the  
transportation locks".  
First use  
Before starting to use the product, make  
sure that all preparations are made in  
accordance with the instructions in  
sections "Important safety instructions"  
and "Installation".  
To prepare the product for washing  
laundry, perform first operation in Drum  
Cleaning programme. If your machine  
is not featured with Drum Cleaning  
programme, use Cottons-90 programme  
and select Additional Water or Extra Rinse  
auxiliary functions as well. Before starting  
the programme, put max. 100 g of  
powder anti-limescale into the main wash  
detergent compartment (compartment nr.  
II). If the anti-limescale is in tablet form,  
put only one tablet into compartment nr.  
II. Dry the inside of the bellow with a clean  
piece of cloth after the programme has  
come to an end.  
Never move the product without the  
transportation safety bolts properly  
fixed in place!  
C
Disposing of the old product  
Dispose of the old product in an  
environmentally friendly manner.  
Refer to your local dealer or solid waste  
collection centre in your area to learn how  
to dispose of your product.  
For children's safety, cut the power  
cable and break the locking mechanism  
of the loading door so that it will be  
nonfunctional before disposing of the  
product.  
Use an anti-limescale suitable for the  
C
washing machines.  
Some water might have remained in  
C
the product due to the quality control  
processes in the production. It is not  
harmful for the product.  
Disposing of packaging material  
Packaging materials are dangerous to  
children. Keep packaging materials in  
a safe place away from reach of the  
children.  
Packaging materials of the product are  
manufactured from recyclable materials.  
Dispose of them properly and sort  
in accordance with recycled waste  
instructions. Do not dispose of them with  
normal domestic waste.  
Transportation of the product  
1. Unplug the product before  
transporting it.  
 
12  
EN  
4 Preparation  
Things to be done for  
energy saving  
Following information will help you use  
the product in an ecological and energy-  
efficient manner.  
Wash with sensitive,  
.short programmes  
Washing water  
temperature  
Operate the product in the highest  
capacity allowed by the programme  
you have selected, but do not  
overload; see, “Programme and  
consumption table”.  
Do not use bleach  
Bleach can be  
used  
Always follow the instructions on the  
detergent packaging.  
Wash slightly soiled laundry at low  
temperatures.  
Use faster programmes for small  
quantities of lightly soiled laundry.  
Do not use prewash and high  
temperatures for laundry that is not  
heavily soiled or stained.  
Suitable for drier  
Do not dry with drier  
Hang without  
spinning  
Can be ironed with  
hot iron  
If you plan to dry your laundry in a  
dryer, select the highest spin speed  
recommended during washing  
process.  
Do not use detergent in excess of  
the amount recommended on the  
detergent package.  
Non machine-washable  
Do not wash  
Do not dry-clean  
Dry on a hanger  
Dry-cleanable  
Sorting the laundry  
Sort laundry according to type of  
fabric, colour, and degree of soiling  
and allowable water temperature.  
Always obey the instructions given on  
the garment tags.  
Dry horizontally  
Can be ironed  
with warm iron  
Do not iron  
Preparing laundry for washing  
Laundry items with metal attachments  
such as, underwired bras, belt  
buckles or metal buttons will damage  
the machine. Remove the metal  
pieces or wash the clothes by putting  
them in a laundry bag or pillow case.  
 
13  
EN  
Correct load capacity  
The maximum load capacity depends on  
the type of laundry, the degree of soiling  
and the washing programme desired.  
The machine automatically adjusts the  
amount of water according to the weight  
of the loaded laundry.  
Follow the information in the  
A
“Programme and consumption table”.  
When overloaded, machines washing  
performance will drop. Moreover,  
noise and vibration problems may  
occur.  
Take out all substances in the pockets  
such as coins, pens and paper clips,  
and turn pockets inside out and  
brush. Such objects may damage the  
product or cause noise problem.  
Put small size clothes such as infants  
socks and nylon stockings in a  
laundry bag or pillow case.  
Laundry types and their average weights  
in the following table are given as  
examples.  
Laundry type  
Bathrobe  
Napkin  
Weight (g)  
1200  
100  
Place curtains in without compressing  
them. Remove curtain attachment  
items.  
Duvet cover  
Bed Sheet  
Pillowcase  
Tablecloth  
Towel  
Hand towel  
Evening gown  
Underclothing  
Mens overalls  
Mens shirt  
Mens pajamas  
Blouses  
700  
500  
200  
250  
200  
100  
200  
100  
600  
200  
500  
100  
Fasten zippers, sew loose buttons  
and mend rips and tears.  
Wash “machine washable” or “hand  
washable” labeled products only with  
an appropriate programme.  
Do not wash colours and whites  
together. New, dark coloured cottons  
release a lot of dye. Wash them  
separately.  
Tough stains must be treated properly  
before washing. If unsure, check with  
a dry cleaner.  
Use only dyes/colour changers  
and limescale removers suitable for  
machine wash. Always follow the  
instructions on the package.  
Wash trousers and delicate laundry  
turned inside out.  
Keep laundry items made of Angora  
wool in the freezer for a few hours  
before washing. This will reduce  
pilling.  
Laundry that are subjected to  
materials such as flour, lime dust,  
milk powder, etc. intensely must be  
shaken off before placing into the  
machine. Such dusts and powders on  
the laundry may build up on the inner  
parts of the machine in time and can  
cause damage.  
Loading the laundry  
Open the loading door.  
Place laundry items loosely into the  
machine.  
Push the loading door to close until  
you hear a locking sound. Ensure that  
no items are caught in the door.  
The loading door is locked while a  
programme is running. The door  
can only be opened a while after the  
programme comes to an end.  
In case of misplacing the laundry,  
noise and vibration problems may  
occur in the machine.  
C
A
 
14  
EN  
Wash your delicate clothes only with  
special detergents (liquid detergent,  
wool shampoo, etc.) used solely for  
delicate clothes.  
When washing dark coloured clothes  
and quilts, it is recommended to use  
liquid detergent.  
Wash woolens with special detergent  
made specifically for woolens.  
Use only detergents manufactured  
specifically for washing machines.  
Using detergent and softener  
Detergent Drawer  
The detergent drawer is composed of  
three compartments:  
- (I) for prewash  
- (II) for main wash  
– (III) for softener  
– (*) in addition, there is siphon piece in  
the softener compartment.  
A
2
1
3
2
1
3
ADo not use soap powder.  
Adjusting detergent amount  
The amount of washing detergent to be  
used depends on the amount of laundry,  
the degree of soiling and water hardness.  
Read the manufacturers instructions  
on the detergent package carefully and  
follow the dosage values.  
The detergent dispenser may be  
in two different types according to  
the model of your machine as seen  
above.  
C
Do not use amounts exceeding the  
dosage quantities recommended  
on the detergent package to avoid  
problems of excessive foam, poor  
rinsing, financial savings and finally,  
environmental protection.  
Detergent, softener and other  
cleaning agents  
Add detergent and softener before  
starting the washing programme.  
Never open the detergent drawer  
while the washing programme is  
running!  
Use lesser detergent for small  
amounts or lightly soiled clothes.  
Use concentrated detergents in the  
recommended dosage.  
When using a programme without  
prewash, do not put any detergent  
into the prewash compartment  
(compartment nr. I).  
In a programme with prewash, do not  
put liquid detergent into the prewash  
compartment (compartment nr. I).  
Do not select a programme with  
prewash if you are using a detergent  
bag or dispensing ball. Place the  
detergent bag or the dispensing ball  
directly among the laundry in the  
machine.  
Using softeners  
Pour the softener into the softener  
compartment of the detergent drawer.  
Use the dosages recommended on  
the package.  
Do not exceed the (>max<) level  
marking in the softener compartment.  
If the softener has lost its fluidity, dilute  
it with water before putting it in the  
detergent drawer.  
Using liquid detergents  
If the product contains a liquid  
detergent cup:  
If you are using liquid detergent, do  
not forget to place the liquid detergent  
cup into the main wash compartment  
(compartment nr. II).  
Make sure that you have placed the  
liquid detergent cup in compartment  
nr. II”.  
Use the detergent manufacturers  
measuring cup and follow the  
instructions on the package.  
Use the dosages recommended on  
the package.  
Choosing the detergent type  
The type of detergent to be used  
depends on the type and colour of the  
fabric.  
Use different detergents for coloured  
and white laundry.  
If the liquid detergent has lost its  
fluidity, dilute it with water before  
 
15  
EN  
putting in the detergent cup.  
Tablet detergents may leave residues  
in the detergent compartment. If you  
encounter such a case, place the  
tablet detergent between the laundry,  
close to the lower part of the drum in  
future washings.  
C
C
Use the tablet or gel detergent  
without selecting the prewash  
function.  
Using starch  
Add liquid starch, powder starch  
or the dyestuff into the softener  
compartment as instructed on the  
package.  
Do not use softener and starch  
together in a washing cycle.  
Wipe the inside of the machine with  
a damp and clean cloth after using  
starch.  
If the product does not contain a  
liquid detergent cup:  
Do not use liquid detergent for  
the prewash in a programme with  
prewash.  
Using bleaches  
Select a programme with prewash  
and add the bleaching agent at  
the beginning of the prewash. Do  
not put detergent in the prewash  
compartment. As an alternative  
application, select a programme  
with extra rinse and add the  
bleaching agent while the machine  
is taking water from the detergent  
compartment during first rinsing step.  
Do not use bleaching agent and  
detergent by mixing them.  
Use just a little amount (approx. 50  
ml) of bleaching agent and rinse the  
clothes very well as it causes skin  
irritation. Do not pour the bleaching  
agent onto the clothes and do not use  
it for coloured clothes.  
When using oxygen based bleaches,  
follow the instructions on the package  
and select a programme that washes  
at a lower temperature.  
Use the detergent manufacturers  
measuring cup and follow the  
instructions on the package.  
Liquid detergent stains your clothes  
when used with Delayed Start  
function. If you are going to use the  
Delayed Start function, do not use  
liquid detergent.  
Using gel and tablet detergent  
When using tablet, gel, etc. detergents,  
read the manufacturers instructions on  
the detergent package carefully and  
follow the dosage values. If there is not  
any instruction on the package, apply the  
following.  
If the gel detergent thickness is fluidal  
and your machine does not contain  
a special liquid detergent cup, put  
the gel detergent into the main wash  
detergent compartment during  
first water intake. If your machine  
contains a liquid detergent cup, fill the  
detergent into this cup before starting  
the programme.  
If the gel detergent thickness is not  
fluidal or in the shape of capsule liquid  
tablet, put it directly into the drum  
before washing.  
Put tablet detergents into the main  
wash compartment (compartment  
nr. II) or directly into the drum before  
washing.  
 
16  
EN  
Oxygen based bleaches can be used  
together with detergents; however,  
if its thickness is not the same with  
the detergent, put the detergent first  
into the compartment nr. II” in the  
detergent drawer and wait until the  
detergent flows while the machine  
is taking in water. Add the bleaching  
agent from the same compartment  
while the machine is still taking in  
water.  
Using limescale remover  
When required, use limescale  
removers manufactured specifically  
for washing machines only.  
Always follow instructions on the  
package.  
 
17  
EN  
Tips for efficient washing  
Clothes  
Colors  
(Recommended  
Light colours and  
whites  
Delicates/  
Woolens/Silks  
Dark colors  
(Recommended (Recommended  
(Recommended  
temperature  
range based  
temperature  
range based  
temperature range temperature range  
based on soiling  
level: 40-90C)  
based on soiling level:  
cold-40C)  
on soiling level: on soiling level:  
cold-40C)  
cold-30C)  
It may be  
necessary to pre-  
treat the stains of  
perform prewash.  
Powder and  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended  
for heavily soiled  
clothes. It is  
Liquid  
Prefer liquid  
detergents  
produced for  
detergents  
suitable for  
Heavily Soiled  
heavily soiled clothes. colours and dark delicate clothes.  
(difficult stains  
such as grass,  
coffee, fruits  
and blood.)  
It is recommended  
to use powder  
colours can be Woollen and silk  
used at dosages clothes must  
recommended be washed with  
for heavily soiled special woollen  
detergents to clean  
clay and soil stains  
recommended  
to use powder  
and the stains that are clothes.  
detergents.  
detergents to clean sensitive to bleaches.  
clay and soil stains Use detergents  
and the stains that without bleach.  
are sensitive to  
bleaches.  
Powder and  
Liquid  
Prefer liquid  
detergents  
produced for  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
normally soiled  
clothes. Use  
Normally Soiled  
detergents  
suitable for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended for  
normally soiled  
clothes.  
colours and dark delicate clothes.  
colours can be Woollen and silk  
used at dosages clothes must  
recommended be washed with  
for normally  
soiled clothes.  
(For example,  
stains caused  
by body on  
collars and  
cuffs)  
special woollen  
detergents.  
detergents without  
bleach.  
Powder and  
Liquid  
Prefer liquid  
detergents  
produced for  
Powder and  
liquid detergents  
recommended for  
colours can be  
used at dosages  
recommended for  
detergents  
suitable for  
liquid detergents  
recommended  
for whites can be  
used at dosages  
recommended for  
Lightly Soiled  
colours and dark delicate clothes.  
colours can be Woollen and silk  
used at dosages clothes must  
(No visible  
stains exist.)  
lightly soiled clothes. recommended be washed with  
lightly soiled clothes. Use detergents  
without bleach.  
for lightly soiled special woollen  
clothes. detergents.  
 
18  
EN  
5 Operating the product  
Control panel  
1
2
3
4
5
6
7
1 - Programme Selection knob (Uppermost position On / Off)  
2 - Display  
3 - Delayed Start button  
4 - Programme Follow-up indicator  
5 - Start / Pause button  
6 - Auxiliary Function buttons  
7 - Spin Speed Adjustment button  
8 - Temperature Adjustment button  
Preparing the machine  
1. Make sure that the hoses are  
connected tightly.  
Heavily soiled white cottons  
and linens. (coffee table  
covers, tableclothes, towels,  
bed sheets, etc.)  
90˚C  
60˚C  
2. Plug in your machine.  
3. Turn the tap on completely.  
4. Place the laundry in the machine.  
5. Add detergent and fabric softener.  
Normally soiled, coloured,  
fade proof cottons or synthetic  
clothes (shirt, nightgown,  
pajamas, etc.) and lightly  
soiled white linens (underwear,  
etc.)  
Programme selection  
1. Select the programme suitable for  
the type, quantity and soiling degree  
of the laundry in accordance with the  
"Programme and consumption table"  
and the temperature table below.  
40˚C-  
30˚C-  
Cold  
Blended laundry including  
delicate textile (veil curtains,  
etc.), synthetics and woolens.  
 
19  
EN  
2. Select the desired programme with  
the Programme Selection button.  
for woolens.  
Additional programmes  
For special cases, additional programmes  
are available in the machine.  
Programmes are limited with the  
C
highest spin speed appropriate for  
that particular type of fabric.  
Additional programmes may differ  
C
When selecting a programme, always  
C
according to the model of the  
machine.  
consider the type of fabric, colour,  
degree of soiling and permissible  
water temperature.  
Always select the lowest required  
temperature. Higher temperature  
means higher power consumption.  
• Cottons Eco  
You may wash your normally soiled  
durable cotton and linen laundry in this  
programme with the highest energy and  
water saving compared to all other wash  
programmes suitable for cottons. Actual  
water temperature may differ from the  
declared cycle temperature. Programme  
duration may automatically be shortened  
during later stages of the programme if  
you wash less amount (e.g. ½ capacity  
or less) of laundry. In this case energy  
and water consumption will be further  
decreased giving you the opportunity for  
a more economical wash. This feature  
is available for certain models having  
remaining time display.  
C
For further programme details, see  
"Programme and consumption table".  
C
Main programmes  
Depending on the type of fabric, use the  
following main programmes.  
• Cottons  
Use this programme for your cotton  
laundry (such as bed sheets, duvet and  
pillowcase sets, towels, bathrobes,  
underwear, etc.). Your laundry will be  
washed with vigorous washing action for  
a longer washing cycle.  
• Baby+Toddler Clothing  
• Synthetics  
Use this programme to wash baby  
laundry, and the laundry that belongs to  
allergic persons. Longer heating time and  
an additional rinsing step provide a higher  
level of hygiene.  
Use this programme to wash your  
synthetic clothes (shirts, blouses,  
synthetic/cotton blends, etc.). It washes  
with a gentle action and has a shorter  
washing cycle compared to the Cottons  
programme.  
• Hand Wash  
Use this programme to wash your  
woolen/delicate clothes that bear “not  
machine- washable” tags and for which  
hand wash is recommended. It washes  
laundry with a very gentle washing action  
to not to damage clothes.  
For curtains and tulle, use the Synthetic  
40˚C programme with prewash and  
anti-creasing functions selected. As  
their meshed texture causes excessive  
foaming, wash the veils/tulle by putting  
little amount of detergent into the main  
wash compartment. Do not put detergent  
in the prewash compartment.  
• Time Saver  
Use this programme to wash your lightly  
soiled cotton clothes in a short time.  
• Darkcare  
• Woollens  
Use this programme to wash your  
woolen clothes. Select the appropriate  
temperature complying with the tags of  
your clothes. Use appropriate detergents  
Use this programme to wash your dark  
coloured laundry or the laundry that you  
do not want it get faded. Washing is  
performed with little mechanic action and  
at low temperatures. It is recommended  
to use liquid detergent or woolen  
shampoo for dark coloured laundry.  
• Mixed Fabrics  
Use this programme to wash your cotton  
and synthetic clothes together without  
 
20  
EN  
sorting them.  
explanations of these options.  
If the programme has not reached the  
C
Special programmes  
spinning step, you can change the  
speed without switching the machine  
to Pause mode.  
For specific applications, select any of the  
following programmes.  
• Rinse  
Use this programme when you want to  
rinse or starch separately.  
• Spin+Drain  
Use this programme to apply an  
additional spin cycle for your laundry or to  
drain the water in the machine.  
Before selecting this programme, select  
the desired spin speed and press Start /  
Pause button. First, the machine will drain  
the water inside of it. Then, it will spin the  
laundry with the set spin speed and drain  
the water coming out of them.  
If you wish to drain only the water  
without spinning your laundry, select the  
Pump+Spin programme and then select  
the No Spin function with the help of Spin  
Speed Adjustment button. Press Start /  
Pause button.  
Use a lower spin speed for delicate  
laundries.  
C
Temperature selection  
Whenever a new programme is selected,  
the maximum temperature for the  
selected programme appears on the  
temperature indicator.  
To decrease the temperature, press  
the Temperature Adjustment button.  
Temperature will decrease gradually.  
If the programme has not reached  
C
the heating step, you can change the  
temperature without switching the  
machine to Pause mode.  
Spin speed selection  
Whenever a new programme is selected,  
the recommended spin speed of the  
selected programme is displayed on the  
spin speed indicator.  
To decrease the spin speed, press  
the Spin Speed Adjustment button.  
Spin speed decreases gradually.  
Then, depending on the model of the  
product, "Rinse Hold" and "No Spin"  
options appear on the display. See  
"Auxiliary function selection" section for  
 
21  
EN  
Programme and consumption table  
EN  
Auxiliary functions  
2
Selectable  
temperature  
range °C  
Programme  
Cottons  
90  
60  
6
6
70  
70  
70  
42  
37  
37  
60  
60  
60  
70  
85  
41  
56  
50  
50  
50  
2.48  
1.50  
0.96  
0.89  
0.78  
0.69  
1.80  
1.00  
0.20  
0.50  
2.20  
0.15  
0.27  
0.73  
0.95  
0.73  
1600  
1600  
1600  
1600  
1600  
1600  
1400  
1400  
1400  
800  
Cold-90  
Cold-90  
Cold-90  
40-60  
Cottons  
Cottons  
40  
6
Cottons Eco  
Cottons Eco  
Cottons Eco  
Time Saver  
Time Saver  
Time Saver  
Dark Care  
60**  
60**  
40**  
90  
6
3
40-60  
3
40-60  
6
*
Cold-90  
Cold-90  
Cold-90  
Cold-40  
30-90  
60  
6
30  
6
40  
3
Baby&Toddler Clothing  
Hand Wash  
Woollens  
90  
6
1600  
600  
*
30  
1
Cold-30  
Cold-40  
Cold-40  
Cold-60  
Cold-60  
40  
1.5  
3
600  
Mixed Fabrics  
Synthetics  
40  
800  
60  
3
800  
Synthetics  
40  
3
800  
• : Selectable  
* : Automatically selected, no cancelling.  
** : Energy Label programme (EN 60456 Ed.3)  
*** :If maximum spin speed of the machine is lower then this value, you can only select  
up to the maximum spin speed.  
- : See the programme description for maximum load.  
Water and power consumption may vary subject to the changes in water pressure,  
C
water hardness and temperature, ambient temperature, type and amount of  
laundry, selection of auxiliary functions and spin speed, and changes in electric  
voltage.  
You can see the washing time of the programme you have selected on the display  
of the machine. It is normal that small differences may occur between the time  
shown on the display and the real washing time.  
C
 
22  
EN  
• Extra Rinse  
The auxiliary functions in the table  
may vary according to the model of  
your machine.  
C
This function enables the machine to  
make another rinsing in addition to the  
one already made after the main wash.  
Thus, the risk for sensitive skins (babies,  
allergic skins, etc.) to be effected by  
the minimal detergent remnants on the  
laundry can be reduced.  
Auxiliary function selection  
Select the desired auxiliary functions  
before starting the programme.  
Furthermore, you may also select or  
cancel auxiliary functions that are suitable  
to the running programme without  
pressing the Start / Pause button when  
the machine is operating. For this, the  
machine must be in a step before the  
auxiliary function you are going to select  
or cancel.  
• Anti-Creasing  
This function creases the clothes lesser  
when they are being washed. Drum  
movement is reduced and spinning speed  
is limited to prevent creasing. In addition,  
washing is done with a higher water level.  
• Rinse Hold  
If the auxiliary function cannot be selected  
or canceled, light of the relevant auxiliary  
function will blink 3 times to warn the user.  
If you are not going to unload your  
clothes immediately after the programme  
completes, you may use rinse hold  
function to keep your laundry in the final  
rinsing water in order to prevent them  
from getting wrinkled when there is no  
water in the machine. Press Start / Pause  
button after this process if you want to  
drain the water without spinning your  
laundry. Programme will resume and  
complete after draining the water.  
If you want to spin the laundry held in  
water, adjust the Spin Speed and press  
Start / Pause button.  
Some functions cannot be selected  
C
together. If a second auxiliary function  
conflicting with the first one is  
selected before starting the machine,  
the function selected first will be  
canceled and the second auxiliary  
function selection will remain active.  
For example, if you want to select  
Quick Wash after you have selected  
the Prewash, Prewash will be  
canceled and Quick Wash will remain  
active.  
The programme resumes. Water  
is drained, laundry is spun and the  
programme is completed.  
An auxiliary function that is not  
C
compatible with the programme  
cannot be selected. (See "Programme  
and consumption table")  
• Soaking  
The Soaking auxiliary function ensures  
better removal of stains ingrained into the  
clothes by holding them in the detergent  
water prior to startup of the programme.  
• Pet hair removal  
Auxiliary Function buttons may  
C
vary according to the model of the  
machine.  
• Prewash  
A Prewash is only worthwhile for heavily  
soiled laundry. Not using the Prewash will  
save energy, water, detergent and time.  
This function helps to remove pet hair that  
remain on your garments more effectively.  
When you select this function, Prewash  
and Extra Rinse steps are added to the  
normal programme. Thus, washing is  
performed with more water (30%) and the  
pet hair is removed more effectively.  
Prewash without detergent is  
recommended for tulle and curtains.  
• Quicker Wash  
C
This function can be used in Cottons and  
Synthetics programmes. It decreases the  
washing times and also the number of  
rinsing steps for lightly soiled laundry.  
Never wash your pets in the washing  
A
machine.  
Delayed Start  
When you select this function,  
C
With the Delayed Start function the  
startup of the programme may be delayed  
up to 19 hours. Delayed start time can be  
increased by increments of 1 hour.  
load your machine with half of the  
maximum laundry specified in the  
programme table.  
 
23  
EN  
on.  
Do not use liquid detergents when  
you set Delayed Start! There is the  
risk of staining of the clothes.  
C
If no programme is started or no key  
is pressed within 1 minute during  
programme selection process, the  
machine will switch to Pause mode  
and the illumination level of the  
temperature, speed and loading  
door indicator lights will decrease.  
Other indicator lights and indicators  
will turn off. Once the Programme  
Selection knob is rotated or any  
button is pressed, indicator lights and  
indicators will turn on again.  
C
1. Open the loading door, place the  
laundry and put detergent, etc.  
2. Select the washing programme,  
temperature, spin speed and, if  
required, the auxiliary functions.  
3. Set the desired time by pressing the  
Delayed Start button.  
4. Press Start / Pause button. The  
delayed start time you have set is  
displayed. Delayed start countdown  
starts. “_” symbol next to the delayed  
start time moves up and down on the  
display.  
Child Lock  
Use Child Lock function to prevent  
children from tampering with the machine.  
Thus you can avoid any changes in a  
running programme.  
Additional laundry may be loaded  
C
during the delayed start period.  
5. At the end of the countdown, duration  
of the selected programme will be  
displayed. “_” symbol will disappear  
and the selected programme will  
start.  
If the Programme Selection knob is  
C
turned when the Child Lock is active,  
"Con" appears on the display. The  
Child Lock does not allow any change  
in the programmes and the selected  
temperature, speed and auxiliary  
functions.  
Changing the Delayed Start period  
If you want to change the time during  
countdown:  
1. Press Delayed Start button. Time will  
increase by 1 hour each time you  
press the button.  
2. If you want to decrease the delayed  
start time, press Delayed Start button  
repeatedly until the desired delayed  
start time appears on the display.  
Cancelling the Delayed Start function  
If you want to cancel the delayed start  
countdown and start the programme  
immediately:  
1. Set the Delayed Start period to zero  
or turn the Programme Selection knob  
to any programme. Thus, Delayed  
Start function will be canceled. The  
End/Cancel light flashes continuously.  
2. Then, select the programme you want  
to run again.  
Even if another programme is  
selected with the Programme  
Selection knob while the Child  
C
Lock is active, previously selected  
programme will continue running.  
To activate the Child Lock:  
Press and hold 1st and 2nd Auxiliary  
Function buttons for 3 seconds.  
The lights on the 1st and 2nd Auxiliary  
Function buttons will flash, and "C03",  
"C02", "C01" will appear on the display  
respectively while you keep the buttons  
pressed for 3 seconds. Then, "Con" will  
appear on the display indicating that the  
Child Lock is activated. If you press any  
button or turn the Programme Selection  
knob when the Child Lock is active, same  
phrase will appear on the display. The  
lights on the 1st and 2nd auxiliary function  
buttons that are used to deactivate the  
Child Lock will blink 3 times.  
3. Press Start / Pause button to start the  
programme.  
Starting the programme  
1. Press Start / Pause button to start the  
programme.  
To deactivate the Child Lock:  
Press and hold 1st and 2nd auxiliary  
function buttons for 3 seconds while any  
programme is running. The lights on the  
1st and 2nd Auxiliary Function buttons  
will flash, and "C03", "C02", "C01" will  
2. Programme follow-up light showing  
the startup of the programme will turn  
 
24  
EN  
appear on the display respectively while  
you keep the buttons pressed for 3  
seconds. Then, "COFF" will appear on the  
display indicating that the Child Lock is  
deactivated.  
current programme; see "Cancelling the  
programme".  
Changing the selections after  
programme has started  
Switching the machine to pause  
mode  
In addition to the method above, to  
C
deactivate the Child Lock, switch the  
Programme Selection knob to On  
/ Off position when no programme  
is running, and select another  
programme.  
Press the Start / Pause button to switch  
the machine to pause mode while a  
programme is running. The light of the  
step which the machine is in starts  
flashing in the Programme Follow-up  
indicator to show that the machine has  
been switched to the pause mode.  
Also, when the loading door is ready to  
be opened, Loading Door light will also  
illuminate continuously in addition to the  
programme step light.  
Changing the speed and temperature  
settings for auxiliary functions  
Depending on the step the programme  
has reached, you may cancel or activate  
the auxiliary functions; see, "Auxiliary  
function selection".  
Child Lock is not deactivated after  
C
power failures or when the machine is  
unplugged.  
Progress of programme  
Progress of a running programme  
can be followed from the Programme  
Follow-up indicator. At the beginning  
of every programme step, the relevant  
indicator light will turn on and light of the  
completed step will turn off.  
You can change the auxiliary functions,  
speed and temperature settings without  
stopping the programme flow while the  
programme is running. To do this, the  
change you are going to make must be in  
a step after the running programme step.  
If the change is not compatible, relevant  
lights will flash for 3 times.  
You may also change the speed and  
temperature settings; see, "Spin speed  
selection" and "Temperature selection".  
If no change is allowed, the relevant  
C
light will flash for 3 times.  
Adding or taking out laundry  
1. Press the Start / Pause button to  
switch the machine to pause mode.  
The programme follow-up light of  
the relevant step during which the  
machine was switched into the pause  
mode will flash.  
If the machine does not pass to the  
C
spinning step, Rinse Hold function  
might be active or the automatic  
unbalanced load detection system  
might be activated due to the  
unbalanced distribution of the laundry  
in the machine.  
2. Wait until the Loading Door can be  
opened.  
3. Open the Loading Door and add or  
take out the laundry.  
4. Close the Loading Door.  
5. Make changes in auxiliary functions,  
temperature and speed settings if  
necessary.  
6. Press Start / Pause button to start the  
machine.  
Cancelling the programme  
To cancel the programme, turn the  
Programme Selection knob to select  
another programme. Previous programme  
will be canceled. End / Cancel light  
will flash continuously to notify that the  
Loading door lock  
There is a locking system on the loading  
door of the machine that prevents  
opening of the door in cases when the  
water level is unsuitable.  
Loading door light will start flashing when  
the machine is switched to Pause mode.  
Machine checks the level of the water  
inside. If the level is suitable, Loading  
Door light illuminates steadily within 1-2  
minutes and the loading door can be  
opened.  
If the level is unsuitable, Loading Door  
light turns off and the loading door cannot  
be opened. If you are obliged to open  
the Loading Door while the Loading  
Door light is off, you have to cancel the  
 
25  
EN  
programme has been canceled.  
Pump function is activated for 1-2  
minutes regardless of the programme  
step, and whether there is water in the  
machine or not. After this period, your  
machine will be ready to start with the first  
step of the new programme.  
Depending on the step where the  
C
programme was canceled in, you may  
have to put detergent and softener  
again for the programme you have  
selected anew.  
End of programme  
“End” appears on the display at the end  
of the programme.  
1. Wait until the loading door light  
illuminates steadily.  
2. Press On / Off button to switch off the  
machine.  
3. Take out your laundry and close the  
loading door. Your machine is ready  
for the next washing cycle.  
 
26  
EN  
6 Maintenance and cleaning  
Service life of the product extends and  
frequently faced problems decrease if  
cleaned at regular intervals.  
Cleaning the detergent drawer  
Clean the detergent drawer at regular  
intervals (every 4-5 washing cycles)  
as shown below in order to prevent  
accumulation of powder detergent in  
time.  
(compartment nr. II). If the anti-limescale  
is in tablet form, put only one tablet into  
compartment nr. II. Dry the inside of the  
bellow with a clean piece of cloth after the  
programme has come to an end.  
Repeat Drum Cleaning process in  
C
every 2 months.  
Use an anti-limescale suitable for the  
washing machines.  
C
After every washing make sure that no  
foreign substance is left in the drum.  
1. Press the dotted point on the siphon  
in the softener compartment and pull  
towards you until the compartment is  
removed from the machine.  
If the holes on the bellow shown in the  
figure is blocked, open the holes using a  
toothpick.  
If more than normal amount of water  
and softener mixture starts to gather  
in the softener compartment, the  
siphon must be cleaned.  
C
Foreign metal substances in your  
C
machine will cause rust stains. Clean  
the stains on the drum surface by  
using cleaning agents for stainless  
steel. Never use steel wool or wire  
wool.  
2. Wash the detergent drawer and the  
siphon with plenty of lukewarm water  
in a washbasin. Wear protective  
gloves or use an appropriate brush to  
avoid touching of the residues in the  
drawer with your skin when cleaning.  
3. Insert the drawer back into its place  
after cleaning and make sure that it is  
seated well.  
Cleaning the body  
and control panel  
Wipe the body of the machine with  
soapy water or non-corrosive mild gel  
detergents as necessary, and dry with a  
soft cloth.  
Cleaning the loading  
door and the drum  
Use only a soft and damp cloth to clean  
the control panel.  
Residues of softener, detergent and  
dirt may accumulate in your machine in  
time and may cause unpleasant odours  
and washing complaints. To avoid this,  
use the Drum Cleaning programme. If  
your machine is not featured with Drum  
Cleaning programme, use Cottons-90  
programme and select Additional Water  
or Extra Rinse auxiliary functions as well.  
Before starting the programme, put  
max. 100 g of powder anti-limescale into  
the main wash detergent compartment  
Never use sponge or scrub materials.  
These will damage the painted and  
plastic surfaces.  
A
Cleaning the water intake filters  
There is a filter at the end of each water  
intake valve at the rear of the machine  
and also at the end of each water  
intake hose where they are connected  
to the tap. These filters prevent foreign  
substances and dirt in the water to enter  
the washing machine. Filters should be  
 
27  
EN  
cleaned as they do get dirty.  
Temperature of the water inside the  
machine may rise up to 90 ºC. To  
avoid burning risk, filter must be  
cleaned after the water in the machine  
cools down.  
A
2. Open the filter cap.  
If the filter cap is composed of two  
pieces, press the tab on the filter cap  
downwards and pull the piece out  
towards yourself.  
1. Close the taps.  
2. Remove the nuts of the water intake  
hoses to access the filters on the  
water intake valves. Clean them with  
an appropriate brush. If the filters are  
too dirty, take them out by means of  
pliers and clean them.  
3. Take out the filters on the flat ends of  
the water intake hoses together with  
the gaskets and clean thoroughly  
under running water.  
If the filter cap is one piece, pull the cap  
from both sides at the top to open.  
4. Replace the gaskets and filters  
carefully in their places and tighten the  
hose nuts by hand.  
Draining remaining water and  
cleaning the pump filter  
The filter system in your machine prevents  
solid items such as buttons, coins and  
fabric fibers clogging the pump impeller  
during discharge of washing water. Thus,  
the water will be discharged without any  
problem and the service life of the pump  
will extend.  
If the machine fails to drain water, the  
pump filter is clogged. Filter must be  
cleaned whenever it is clogged or in every  
3 months. Water must be drained off first  
to clean the pump filter.  
In addition, prior to transporting the  
machine (eg., when moving to another  
house) and in case of freezing of the  
water, water may have to be drained  
completely.  
You can remove the filter cover by  
C
slightly pushing downwards with a  
thin plastic tipped tool, through the  
gap above the filter cover. Do not  
use metal tipped tools to remove the  
cover.  
3. Some of our products have  
emergency draining hose and some  
does not have. Follow the steps  
below to discharge the water.  
Discharging the water when the product  
has an emergency draining hose:  
Foreign substances left in the pump  
A
filter may damage your machine or  
may cause noise problem.  
In order to clean the dirty filter and  
discharge the water:  
1. Unplug the machine to cut off the  
supply power.  
 
28  
EN  
while installing it into its housing. Seat  
the filter into its place completely.  
Otherwise, water may leak from the  
filter cap.  
6. If the filter cap is composed of two  
pieces, close the filter cap by pressing  
on the tab. If it is one piece, seat the  
tabs in the lower part into their places  
first, and then press the upper part to  
close.  
a. Pull the emergency draining hose out  
from its seat  
b. Place a large container at the end  
of the hose. Drain the water into  
the container by pulling out the plug  
at the end of the hose. When the  
container is full, block the inlet of  
the hose by replacing the plug. After  
the container is emptied, repeat the  
above procedure to drain the water in  
the machine completely.  
c. When draining of water is finished,  
close the end by the plug again and  
fix the hose in its place.  
d. Turn the pump filter to take it out.  
Discharging the water when the product  
does not have an emergency draining  
hose:  
a. Place a large container in front of the  
filter to catch water from the filter.  
b. Loosen pump filter (anticlockwise)  
until water starts to flow. Fill the  
flowing water into the container  
you have placed in front of the filter.  
Always keep a piece of cloth handy to  
absorb any spilled water.  
c. When the water inside the machine is  
finished, take out the filter completely  
by turning it.  
4. Clean any residues inside the filter as  
well as fibers, if any, around the pump  
impeller region.  
5. Install the filter.  
If your product has a water jet feature,  
be sure to fit the filter into its housing  
in the pump. Never force the filter  
A
 
29  
EN  
7 Troubleshooting  
Programme cannot be started or selected.  
Washing machine has switched to self protection mode due to a supply problem  
(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel  
button for 3 seconds to reset the machine to factory settings. (See "Canceling the  
programme")  
Water in the machine.  
Some water might have remained in the product due to the quality control  
processes in the production. >>> This is not a failure; water is not harmful to the  
machine.  
There is water leaking from the bottom of the washing machine.  
Likely problems with hoses or the pump filter. >>> Be sure the seals of the water  
inlet hoses are securely fitted. Attach the hose to the tap tightly.  
Pump filter might not be closed fully. >>> Make sure that the pump filter is  
completely closed.  
Machine does not fill with water.  
Tap is turned off. >>> Open the inlet water taps fully.  
Water inlet hose is bent. >>> Flatten the water inlet hose.  
Water inlet filter is clogged. >>> Clean the water inlet filter.  
The loading door is ajar. >>> Close the Loading Door.  
Machine does not drain water.  
Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.  
Pump filter is clogged. >>> Clean the pump filter.  
Machine vibrates or makes noise.  
Machine might be standing unbalanced. >>> Adjust the feet to level the machine.  
A hard substance might have entered into the pump filter. >>> Clean the pump  
filter.  
Transportation safety bolts are not removed. >>> Remove the transportation  
safety bolts.  
Laundry quantity in the machine might be too little. >>> Add more laundry to the  
machine.  
Machine might be overloaded with laundry. >>> Take out some of the laundry  
from the machine or distribute the load by hand to balance it homogenously in the  
machine.  
Machine might be leaning on a rigid item. >>> Make sure that the machine is not  
leaning on anything.  
Machine stopped shortly after the programme started.  
Machine might have stopped temporarily due to low voltage. >>> It will resume  
running when the voltage restores to the normal level.  
Machine directly discharges the water it takes in.  
Draining hose might not be at adequate height. >>> Connect the water draining  
hose as described in the operation manual.  
No water can be seen in the machine during washing.  
The water level is not visible from outside of the washing machine. This is not a  
failure.  
C
 
30  
EN  
Loading door cannot be opened.  
Door lock is activated because of the water level in the machine. >>> Drain the  
water by running the Pump or Spin programme.  
Machine is heating up the water or it is at the spinning cycle. >>> Wait until the  
programme completes.  
Child lock is engaged. Door lock will be deactivated a couple of minutes after  
the programme has come to an end. >>> Wait for a couple of minutes for  
deactivation of the door lock.  
Washing takes longer time than the one specified in the manual.  
Water pressure is low. >>> Machine waits until taking in adequate amount of  
water to prevent poor washing quality due to the decreased amount of water.  
Therefore, the washing time extends.  
Voltage might be low. >>> Washing time is prolonged to avoid poor washing  
results when the supply voltage is low.  
Input temperature of water might be low. >>> Required time to heat up the water  
extends in cold seasons. Also, washing time can be lengthened to avoid poor  
washing results.  
Number of rinses and/or amount of rinse water might have increased. >>>  
Machine increases the amount of rinse water when good rinsing is needed and  
adds an extra rinsing step if necessary.  
Excessive foam might have occurred and automatic foam absorption system  
might have been activated due to too much detergent usage. >>> Use  
recommended amount of detergent.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
Programme time does not countdown. (On models with display)  
Timer may stop during water intake. >>> Timer indicator will not countdown until  
the machine takes in adequate amount of water. The machine will wait until there  
is sufficient amount of water to avoid poor washing results due to lack of water.  
Timer indicator will resume countdown after this.  
Timer may stop during heating step. >>> Timer indicator will not countdown until  
the machine reaches the selected temperature.  
Timer may stop during spinning step. >>> Automatic unbalanced load detection  
system might be activated due to the unbalanced distribution of the laundry in the  
drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
Programme time does not countdown.  
There might be an imbalance of laundry in the machine. >>> Automatic  
unbalanced load detection system might be activated due to the unbalanced  
distribution of the laundry in the drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
 
31  
EN  
Machine does not switch to spinning step.  
There might be an imbalance of laundry in the machine. >>> Automatic  
unbalanced load detection system might be activated due to the unbalanced  
distribution of the laundry in the drum.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
The machine will not spin if water is not drained completely. >>> Check the filter  
and the draining hose.  
Excessive foam might have occurred and automatic foam absorption system  
might have been activated due to too much detergent usage. >>> Use  
recommended amount of detergent.  
C
Washing performance is poor: Laundry turns gray.  
Insufficient amount of detergent was used over a long period of time. >>> Use  
the recommended amount of detergent appropriate for water hardness and the  
laundry.  
Washing was made at low temperatures for a long time over a long period of time.  
>>> Select the proper temperature for the laundry to be washed.  
Insufficient amount of detergent is used with hard waters. >>> Using insufficient  
amount of detergent with hard water causes the soil to stick on the cloth and this  
turns the cloth into gray in time. It is difficult to eliminate graying once it happens.  
Use the recommended amount of detergent appropriate for water hardness and  
the laundry.  
Too much detergent is used. >>> Use the recommended amount of detergent  
appropriate for water hardness and the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Stains persist or the laundry is not whitened.  
Insufficient amount of detergent is used. >>> Use recommended amount of  
detergent appropriate for the laundry.  
Excessive laundry was loaded in. >>> Do not load the machine in excess. Load  
with amounts recommended in the "Programme and consumption table".  
Wrong programme and temperature were selected. >>> Select the proper  
programme and temperature for the laundry to be washed.  
Wrong type of detergent is used. >>> Use original detergent appropriate for the  
machine.  
Detergent is put in the wrong compartment. >>> Put the detergent in the correct  
compartment. Do not mix the bleaching agent and the detergent with each other.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Oily stains appeared on the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Washing performance is poor: Clothes smell unpleasantly.  
Odours and bacteria layers are formed on the drum as a result of continuous  
washing at lower temperatures and/or in short programmes. >>> Leave the  
detergent drawer as well as the loading door of the machine ajar after each  
washing. Thus, a humid environment favorable for bacteria cannot occur in the  
machine.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
32  
EN  
Colour of the clothes faded.  
Excessive laundry was loaded in. >>> Do not load the machine in excess.  
Detergent in use is damp. >>> Keep detergents closed in an environment free of  
humidity and do not expose them to excessive temperatures.  
A higher temperature is selected. >>> Select the proper programme and  
temperature according to the type and soiling degree of the laundry.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
It does not rinse well.  
The amount, brand and storage conditions of the detergent used are  
inappropriate. >>> Use a detergent appropriate for the washing machine and  
your laundry. Keep detergents closed in an environment free of humidity and do  
not expose them to excessive temperatures.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Put the detergent in the correct  
compartment.  
Pump filter is clogged. >>> Check the filter.  
Drain hose is folded. >>> Check the drain hose.  
Laundry became stiff after washing.  
Insufficient amount of detergent is used. >>> Using insufficient amount of  
detergent for the water hardness can cause the laundry to become stiff in time.  
Use appropriate amount of detergent according to the water hardness.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Put the detergent in the correct  
compartment.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Laundry does not smell like the softener.  
Detergent is put in the wrong compartment. >>> If detergent is put in the  
prewash compartment although prewash cycle is not selected, machine can take  
this detergent during rinsing or softener step. Wash and clean the dispenser with  
hot water. Put the detergent in the correct compartment.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
33  
EN  
Detergent residue in the detergent drawer.  
Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in  
detergent.  
Detergent has gotten damp. >>> Keep detergents closed in an environment free  
of humidity and do not expose them to excessive temperatures.  
Water pressure is low. >>> Check the water pressure.  
The detergent in the main wash compartment got wet while taking in the prewash  
water. Holes of the detergent compartment are blocked. >>> Check the holes  
and clean if they are clogged.  
There is a problem with the detergent drawer valves. >>> Call the Authorized  
Service Agent.  
Detergent might be mixed with the softener. >>> Do not mix the softener with  
detergent. Wash and clean the dispenser with hot water.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
There is detergent left on the laundry.  
Excessive laundry was loaded in. >>> Do not load the machine in excess.  
Wrong programme and temperature were selected. >>> Select the proper  
programme and temperature for the laundry to be washed.  
Wrong detergent was used. >>> Select the proper detergent for the laundry to be  
washed.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
Too much foam forms in the machine.  
Improper detergents for the washing machine are being used. >>> Use  
detergents appropriate for the washing machine.  
Excessive amount of detergent is used. >>> Use only sufficient amount of  
detergent.  
Detergent was stored under improper conditions. >>> Store detergent in a closed  
and dry location. Do not store in excessively hot places.  
Some meshed laundry such as tulle may foam too much because of their texture.  
>>> Use smaller amounts of detergent for this type of item.  
Detergent is put in the wrong compartment. >>> Put the detergent in the correct  
compartment.  
Softener is being taken early. >>> There may be problem in the valves or in the  
detergent dispenser. Call the Authorized Service Agent.  
Regular drum cleaning is not applied. >>> Clean the drum regularly. For this,  
please see "Cleaning the loading door and the drum".  
 
34  
EN  
Foam is overflowing from the detergent drawer.  
Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and  
pour into the main wash compartment of the detergent drawer.  
Put detergent into the machine suitable for the programmes and maximum loads  
indicated in the “Programme and consumption table”. When you use additional  
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.  
C
Laundry remains wet at the end of the programme  
Excessive foam might have occurred and automatic foam absorption system might  
have been activated due to too much detergent usage. >>> Use recommended  
amount of detergent.  
Machine does not switch to spinning step when the laundry is not evenly  
distributed in the drum to prevent any damage to the machine and to its  
surrounding environment. Laundry should be rearranged and re-spun.  
C
If you cannot eliminate the problem although you follow the instructions in this  
section, consult your dealer or the Authorized Service Agent. Never try to repair a  
nonfunctional product yourself.  
A
 
35  
EN  
8 Guarantee  
Your new Beko product is guaranteed  
against the cost of breakdown repairs  
for twelve months from the date of the  
original purchase.  
Booklet provided.  
Professional installation by a qualified  
Electrical Domestic Appliance Installer  
is recommended for all Washing  
Machines, Dishwashers and Electric  
Cookers  
What is covered?  
Gas Cookers must only be installed by  
a CORGI (or BORD GAIS) registered  
Gas Installer.  
The guarantee is given only within the  
boundaries of the United Kingdom  
and the Republic of Ireland.  
The guarantee is applicable only to  
new products and is not transferable if  
the product is resold.  
Repairs necessary as a result of faulty  
materials, defective components or  
manufacturing defect.  
The cost of functional replacement  
parts, but excluding consumable  
items.  
The labour costs of a Beko approved  
repairer to carry out the repair.  
Beko disclaims any liability for  
incidental or consequential damages.  
The guarantee does not in anyway  
diminish your statutory or legal rights.  
What is not covered?  
Transit, delivery or accidental damage  
or misuse and abuse.  
Cabinet or appearance parts,  
including knobs, flaps, handles or  
container lids.  
Should you experience any difficulty in  
obtaining service please contact the Beko  
Customer Help-Line.  
Tel: 0845 600 4911  
Accessories or consumable items  
including but not limited to, ice trays,  
scrapers, cutlery baskets, filters and  
light bulbs.  
Repairs required as a result of  
unauthorised repair or inexpert  
installation that fails to meet the  
requirements contained in the user  
instruction book.  
Repairs to products used on  
commercial or non-residential  
household premises.  
Loss of frozen food in freezers or  
fridge/freezers. (Food loss insurance is  
often included within your household  
contents insurance policy, or may be  
available separately from your retailer).  
Important notes.  
Your Beko product is designed and  
built for domestic household use only.  
The guarantee will be void if the  
product is installed or used in  
commercial or non-residential  
domestic household premises.  
The product must be correctly  
installed, located and operated in  
accordance with the instructions  
contained in the User Instructions  
 
36  
EN  
9
Service  
Please keep your purchase receipt or  
other proof of purchase in a safe place;  
you will need to have it should the product  
require attention under guarantee.  
service can be obtained at a charge.  
Should you experience any difficulty in  
obtaining service please contact the Beko  
Customer Help-Line.  
Tel: 0845 600 4911  
You should also complete the details  
below; it will help us assist you when  
requesting service. (The model number  
is printed on the Instruction Booklet and  
the serial number is printed on the Rating  
Label affixed to the appliance)  
Model No:  
Serial No:  
Retailer:  
Date of purchase:  
For service under guarantee simply  
telephone the appropriate number below  
UK Mainland & Northern Ireland  
Fridges & Freezers  
Electric Cookers  
Gas &  
0845 600 4903  
0845 600 4902  
0845 600 4905  
Dual Fuel Cookers  
Washing Machines &  
Dishwashers  
0845 600 4906  
Republic of Ireland  
All Refrigeration,  
All Cookers  
01 862 3411  
Washing Machines & Dishwashers  
Before requesting service please  
check the trouble-shooting guide in the  
Operating Instructions as a charge may be  
levied where no fault is found even though  
your product may still be under guarantee.  
Service once the manufacturers  
guarantee has expired.  
If you have purchased an extended  
guarantee please refer to the instructions  
contained within the extended guarantee  
agreement document. Otherwise please  
call the appropriate number above where  
 
37  
EN  
 
38  
EN  
 
39  
EN  
 

Beko Ventilation Hood HBV60X User Manual
Black Decker Iron F63E User Manual
Black Decker Toaster T100 Series User Manual
Blue Rhino Landscape Lighting GLL800W User Manual
Brada Appliances Air Conditioner YPM 06C User Manual
Briggs Stratton Lawn Mower RIDER 11 User Manual
Brinkmann Landscape Lighting Candle Glow Garden Lanterns User Manual
Broan Door C500 User Manual
Canon Scanner 2455B002 User Manual
Chicago Electric Sewing Machine 90715 User Manual